[. . . ] 7 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Pipe dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Checking the wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Preparing the installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] A damaged connection cable must be replaced by a qualified technician (electrician). Always replace defective bulbs immediately (leave bulbs to cool down first) to prevent the remaining bulbs from overloading. Keep children away and ensure appliance is used properly.
Operating modes
This appliance can be used in exhaust-air mode or circulatingair mode.
If the exhaust air is conveyed through the outer wall, a telescopic wall box should be used.
Exhaust air mode
The air which is drawn in is cleaned by the grease filters and conveyed to the exterior by a pipe system.
Circulating-air mode
The air which is drawn in is cleaned by the grease filters and an activated carbon filter and conveyed back into the kitchen.
Note: The exhaust air must not be conveyed into a functioning smoke or exhaust gas flue or into a shaft which is used to ventilate installation rooms which contain heating appliances.
Before conveying the exhaust air into a non-functioning smoke or exhaust gas flue, obtain the consent of the heating engineer responsible.
Note: To bind odours in circulating-air mode, you must install an activated carbon filter. The different options of operating the appliance in circulating-air mode can be found in the brochure or ask your dealer. The required accessories are available from specialist outlets, from customer service or from the Online Shop. The accessory numbers can be found at the end of the instructions for use.
Operation
These instructions apply to several appliance models. It is possible that individual features are described which do not apply to your appliance. Note: Switch on the extractor hood when you start cooking and switch it off again several minutes after you have finished cooking. Control panel variant 1
Switching on fan: variant 1
Press On/Off button. Increase fan setting by pressing button @ or reduce it by pressing button A. Intensive setting You can use the Intensive setting for particularly strong odour and fume generation. You can always switch back manually.
2Q2II
'LVSOD\ IDQ VHWWLQJV
/LJKW 2Q2II
Switching on fan: variants 2 and 3
Increase or reduce the fan settings by pressing buttons 1, 2 and 3. Intensive setting: variant 3 Press button ~.
5HGXFH IDQ VSHHG
Control panel variant 2
, QFUHDVH IDQ VSHHG , QWHQVLYH VHWWLQJ
Light
The light can be switched on and off independently of the fan.
/LJKW 2Q2II
Control panel variant 3
)DQ VHWWLQJV
/LJKW 2Q2II
4
)DQ VHWWLQJV
3
, QWHQVLYH VHWWLQJ
Installing and removing filter
ã=Risk of burns, risk of electric shock!
from appliance. Pull metal-mesh grease filter downwards.
In doing so, place other hand under the metal-mesh grease filter.
2. Take metal-mesh grease filter out of the holder.
Removing metal-mesh grease filter
1. This has no effect on the function of the metal-mesh grease filters.
Do not clean heavily soiled metal-mesh grease filters together with utensils. The metal-mesh greases filter must not be wedged in.
Clean the surfaces with a soft, damp cloth, washing-up liquid or a mild window cleaner. Dry cloths, abrasive sponges, scouring agents, cleaning agents containing sand, soda, acid, chlorine or any other aggressive substances are not suitable. Clean the stainless steel surfaces in the direction of the ground surface only. Do not use stainless steel cleaner or wet cloths for the controls.
By hand: Note: You can use a special grease solvent for stubborn dirt. It can be ordered via the Online Shop.
Soak the metal-mesh grease filters in a hot soapy solution. Leave the metal-mesh grease filters to drain.
5
Replacing bulbs
ã=Risk of burns, risk of electric shock!
from defective bulbs. [. . . ] ª
ã=Risk of electric shock!
from damaged connection cable. The required connection data can be found on the rating plate inside the appliance; to do this, remove the metal-mesh grease filter. 1. 30 m This appliance complies with the EC interference suppression regulations. This appliance may be connected to a correctly installed earthed socket only. [. . . ]