[. . . ] Safety instructions This appliance is designed for domestic use or for use in non-commercial, householdlike environments, such as staff kitchens in shops, offices, agricultural and other small businesses or for use by guests at bed-andbreakfast establishments, small hotels and similar residential facilities. Risk of electric shock  Do not use near water contained in bathtubs, sinks, or in other containers. [. . . ] —● Unroll the right amount of cable from the cable tidy 10 and plug it in. —● When the water comes to a boil for the first time, add a tablespoon of white vinegar. Boiling water ●● Fill the kettle with fresh water through the spout or the open lid 2 (press lid release button 3). —● Check the amount by reading the water level indicator markings (min and max). —● Close the lid 2 until it locks and place the kettle 1 on the base 9. The kettle emits a signal, and the factory-set temperature (100°C) lights up. —● By pressing button 6 + or – you can set the temperature to ca. —● When the water has reached the selected temperature, the kettle will switch off automatically, the temperature indicator 5 goes off, and a signal sounds. Note: The selected temperature can be changed at any time while the kettle is heating up. While the kettle heats up, the current temperature lights up; the preset temperature flashes until it has been reached. If the temperature cannot be set, this indicates that the water in the kettle is hotter than the desired temperature. Keep warm setting You can turn on the keep warm with any temperature setting. [. . . ] A Guarantee The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold. Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. [. . . ]