[. . . ] Instruction Manual
DVD-R121
AK68-00700A-00
Getting Started
Warning
IMPORTANT NOTE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. If it requires replacing, a fuse approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. [. . . ] Stop mode, press the TIMER
DVD-RAM(VR)
Disc Navigation Playlist Disc manager Programme Setup G-Code Timer Record G-Code Extended : Off Programme
MOVE
OK
RETURN
EXIT
Using the MENU button.
q q
Recording
q
With the unit in Stop mode, press the MENU button. buttons to select Timer Record.
2
Press the OK or button.
· The Timer Recording screen is displayed.
NOTE
s
DVD-RAM(VR)
Scheduled Record List Recordable Time 02:12 SP
No. 01 --:---:-Source Date Start
End Mode
When you are recording at EP mode on a DVD-RW(V)/R disc, it may not record the full 6 or 8 hours because the unit uses the VBR(Variable Bit Rate) ENCODING system. For example, if you record a program with a lot of action, it uses a higher bit rate which in turn consumes more disc memory.
PR 01 01/JAN(SAT) 12 : 00 14 : 00 SP Recordable Time 02:12 SP
MOVE
OK
RETURN
EXIT
3 Set timer recording option.
· Fill the input items using the arrow buttons and number buttons. oe : Moves to the previous/next item, . . . , 0~9 : Sets a value.
English -43
4 Press the OK button.
q
will appear on the front panel. It means that a timer recording is registered.
If the timer settings overlap The programmes are recorded in order of priority. If timer recording is set for the first programme and then again for the second programme and both programmes overlap, the following message will appear on the screen: "This setting is identical with 1"The message shows that the first programme has priority. After recording of the first program is complete, the second program starts being recorded. To return to the previous menu Press the RETURN button if you don't want to set a timer recording.
Editing the Scheduled Record List
Follow these directions to edit the timer record list.
unit in 1 With thebutton. Stop mode, press the TIMER
DVD-RAM(VR)
Disc Navigation Playlist G-Code Timer Record G-Code Extended : Off Programme
5
Turn the power off to finish the Timer Recording setting. Timer Recording will not work when the power is on.
q
Disc manager Programme Setup
will blink if disc is not inserted.
MOVE OK RETURN EXIT
s
Recording
NOTE
The timer recording time may differ from the set time depending on disc status and overall timer recording status (for example, recording times overlapping, or when the previous recording ends within 2 minutes before the start time of the next recording. ) You can make the Timer Recording up to 12 programmes.
Using the MENU button.
q q
q
With the unit in Stop mode mode, press the MENU button. buttons to select Timer Record.
s
2 Press the OK or button.
Press the RETURN button 3 Timer Recording screen. to close the
DVD-RAM(VR)
Scheduled Record List Recordable Time 02:12 SP No. Source Date Start End Mode Edit -
Flexible Recording (for Timer recording only)
01 -- -- -- - -- No. 01 --:---:-Source Date Start
End Mode
PR 01 01/JAN(SAT) 12 : 00 14 : 00 SP Recordable Time 02:12 SP
MOVE
OK
RETURN
EXIT
In FR mode, the most suitable record mode is adjusted automatically, according to remaining time on the disc and length of the timer recording. This function is selected only one mode in XP, SP, LP and EP modes and you can use this mode for timer recording. buttons to the number 4 Press the OK or button. select to edit, then of the timer recording you want press
q
The Edit and Delete items are displayed.
DVD-RAM(VR)
Scheduled Record List Recordable Time 02:12 SP No. Source Date Start End Mode Edit
Edit 01 PR 01 01 JAN 12 : 00 14 : 00 SP Delete 02 -- -- -- - -- --:-- --:-- --
MOVE
OK
RETURN
EXIT
44- English
the . . . 5 Press the OK orbuttons to select Edit, then press button.
q
Press the RETURN button 3 Timer Recording screen. to close the
DVD-RAM(VR)
Scheduled Record List Recordable Time 02:12 SP No. Source Date Start End Mode Edit -
The Timer Record Input item is displayed. See the "Making a Timer Recording" section for more information on Timer Recording Input items.
DVD-RAM(VR)
Scheduled Record List Recordable Time 02:12 SP No. [. . . ] Do you want to continue?'
Editing
DVD-RW(VR:F)
Disc Navigation Playlist Disc manager Programme Setup Disc Name :
Disc Manager
Disc Format : DVD-VR Disc will be unfinalised. Yes No
MOVE
OK
RETURN
EXIT
English -83
Troubleshooting
Additional Information
If your product malfunctions, go through the checkpoints below before contacting a Samsung authorised service centre.
Power
The input is displayed for a while when the power is turned on.
Checkpoint 1
The DVD recorder requires some time to initialize and the input will be displayed for approx. 10 seconds after it is turned on.
Recording
Cannot record TV programmes.
Checkpoint 1
Check whether the power cord is securely plugged into the power outlet. Check the free space on your DVD-RAM/DVD-RW/DVD-R discs.
Checkpoint 2
Checkpoint 3
I pressed the REC button but there is no response.
Checkpoint 1
Recording is possible for DVDRAM/DVD-RW/DVD-R discs only. [. . . ]