[. . . ] Disposal in an environmentally-responsible manner Dispose of packaging in an environmentally-responsible manner. This appliance is labelled in accordance with the European guideline 2002/96/EC on waste electrical and electronic equipment - WEEE. The guideline provides an EU-wide framework for the return and recycling of old appliances.
Intended use
for domestic use only, only to be used for drying fabrics that have been washed with water.
Preparing for installation, see Page 8
Never start the dryer if it is damaged!Inform your after-sales service.
Drying
Inspecting the dryer Connecting the mains plug
Condensation container with filter Drum interior light Control panel
Emptying condensation
Empty container after each drying operation, and not when drying is in progress! [. . . ] Replacing the bulb -> Page 10.
Empty the condensation container -> Page 4. Press the (Start/Stop) button -> condensation is pumped into the container. Turn the programme selector to Off.
Optional accessories
Order no. : Washer-dryer stack connection set WTZ 11310 The dryer can be placed on top of a suitable washing machine with the same width and depth to save space. This connection set must always be used to secure the dryer to the washing machine. WTZ 11300
Transport
Preparation of dryer -> see Frost protection. Following transportation, leave the dryer to stand for one hour. The dryer contains residual water; this can flow out if the dryer is tilted.
Installation underneath the worktop WTZ 10290 Risk of electric shock!Instead of the appliance covering plate, you must have a metal cover fitted by an expert.
7
8
Platform WMZ 20460 Facilitates loading and unloading the appliance. The laundry in a dryer with a heat exchanger requires sufficient residual moisture. Fine layer of scale on the moisture sensors -> Clean the moisture sensors -> page 6. Use the next drying programme up or use the timer programme as a supplement -> Page 7. Speed at which the washing machine was spun; only used if the anticipated drying time needs to be displayed more accurately.
1
2
Drying
pecting the dryer necting the mains plug ading laundry
Condensation container with filter Drum interior light Control panel
Emptying condensation
Empty container after each drying operation, and not when drying is in progress!If flashes in the display panel -> Page 6/10.
Cleaning the fluff filter
Clean the fluff filter after each drying operation. If the fluff filter is very dirty or blocked, rinse with warm water and dry thoroughly. Remove fluff from door/door area.
Switching off the dryer e programme
rying programme . . . dual requirements
overview -> Page 7 Turn the programme selector to Off. Do not leave laundry in the dryer.
1 2
Removing the laundry
Your dryer is equipped with an automatic anti-crease function. The drum is moved at specific time intervals for 30 minutes once the programme has ended. The laundry stays loose and fluffy (60 or 120 minutes if the additional Reduced Ironing function is selected).
sensitive and only ched lightly.
e Start/Stop button
the dryer with nserted!
3
Fluff filter Drum Air inlet
The programme has ended when lights up in the display panel. Interrupt programme to load/unload laundry.
The drying operation can be interrupted briefly to load or unload laundry. Never switch the dryer off before the drying process has ended.
1 -24 hrs 0, 1, 2, 3 tton down for On-Off ix and Super 0, 1, 2, 3 6001800 Do not pull out/empty the condensation container when drying is in progress!Press the (Start/Stop) button.
3
4
Information on laundry . . .
Labelling of fabrics
Follow the manufacturer's care information. [. . . ] This connection set must always be used to secure the dryer to the washing machine. WTZ 11300
Installation underneath the worktop WTZ 10290 Risk of electric shock!Instead of the appliance covering plate, you must have a metal cover fitted by an expert. The laundry in a dryer with a heat exchanger requires sufficient residual moisture. [. . . ]