[. . . ] Temperature selector knob This knob allows you to adjust the wash temperature from cold to 90°C. When laundry is not too dirty you can position the temperature selector to e. The washing time is not
2
3
4
changed, and you will achieve significant saving of electricity while the washing quality stays the same. ON/OFF and spinning switch knob This switch has three positions: O - The washing machine is turned off 120 - 800 - The washing machine is turned on and the programme includes spinning with the spin speed you choose (120-800 rpm) - in this position the washing machine is turned on and washing programme will finish at the last rinse without draining water ( the laundry stays in water in order to prevent wrinkling ) It is used for delicate laundry. [. . . ] Turn the programme selector knob clockwise to the desired programme.
3
3. Adjust the temperature selection knob to the required temperature.
5
5. Turn the ON/OFF knob to the position: 120 - 800 - if you want to include the spinning into the programme - if you want laundry to remain in water after washing cycle is complete
8
IMPORTANT INFORMATION ABOUT THE WASHING MACHINE FUNCTION
1. Your washing machine does not start immediately after switching it on - but it begins to fill water only after 15-20 seconds, that is the time needed for the electric door locking. When washing cotton and resistant synthetics, the program does not end after final spinning finish but the drum goes on reversing up to circa 3 min (its rotation alters in one and another direction), which helps to release the laundry after spinning. Spinning has an interrupted start-up - the drum starts and stops running several times - it is so called interval spinning with an increased spinning efficiency. If you set the spinning speed knob to the washing machine will stop before the final spinning and the laundry stays floating in water. Front part of the top frame and the cabinet can get warm from the electric door lock, which is not a fault.
INTERRUPTING THE WASH PROGRAMME
If you want to change selected programme 1. Switch OFF the washing machine by adjusting the ON/OFF knob to the position O. Switch ON the washing machine by turning ON/ OFF knob to required spinning speed. If you want to add another piece of laundry, you can interrupt the washing cycle at any time: 1. The door is electrically closed during the whole washing cycle, so you must wait oneminute approx. Switch ON the washing machine with the ON/OFF knob and the washing machine will continue the selected wash cycle. End of the wash programme The programme is completed when the programme selector knob is at the end of the spin cycle . The safety device will keep the door locked at the end of the wash cycle for approximately one minute. Remove the laundry, pay attention not to drop small items between the tub and the cabinet.
9
10
HOW TO SELECT THE WASH PROGRAMME
Programme selector I yes yes yes yes yes yes yes - 40o C - 40 C
o
Type of load II yes yes yes yes yes l yes l - 60 C
o
Max. load Button 1/2 yes yes - 40 C
o
Dispenser Temperature Spinning speed 800 800 800 - 500 120 - 800 120 - 800 - 400 400 120 - 800 120 - 800 -
Programme length 130 min. 90 oC) 5 kg 5 kg 2 kg l - 90o C
5 kg
l
- 90o C
Cotton white (max. 40 oC)
Rinsing and spinning 2-5 kg 2 kg 1 kg
/
2-5 kg
Spinning
Synthetic delicates (max. 40 oC)
Rinsing and spinning
/
Spinning
Draining
l - push button press only for the washing half load
HOW TO SORT THE LAUNDRY
, , , . We suggest you wash them separately in the machine or by hand for the first two or three times. Please refer to the Programme Chart to select the correct wash programme.
a) By care label Separate your wash according to the temperature b) By type of fabric White cotton Coloured cotton Synthetics: -mixed -delicates Silk, delicate linen Wool
HOW TO MAINTAIN THE WASHING MACHINE
Your washing machine does not need much maintenance. [. . . ] 55 cm from the floor.
ELECTRICAL CONNECTION
This product is intended for connection to electrical network 220 - 230 V/50Hz protected by a 10 ampere fuse, fixed up by plug with earth connection. This washer meets the requirements of European Economic Community 87/308/EEC and all following international standards and regulations. The Electrical installation has to be installed according to Local Regulations. If the washer is placed in wet environment (laundry, bathroom), it has to be protected by effective earth connection - all metallic parts in the room, which may come in contact with the washing machine must be properly connected to avoid any hasards. [. . . ]