[. . . ] • If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet. Always leave a space of at least four inches around the product for ventilation. • Make sure that curtains or other objects never cover the ventilation slots on the product.
Note •• The rated power voltage is printed on the back of the
product. The model number and serial number are printed on the bottom.
2
EN
2 Your clock radio
Congratulations on your purchase, and welcome to Philips! [. . . ] • When an alarm rings, press to snooze the alarm.
4
EN
Know about the LCD display
a c d e g f b
a The first alarm is activated. g The current source
EN
5
3 For the first time use
Assemble the AC power adaptor
4
Fix another plug converter to the power adaptor.
Connect power
1 2
Align the plug converter to the holes on the power adaptor. Push the plug converter downwards until you hear a "click".
Connect the AC power adaptor between • the DC-IN socket on the back panel, and • the AC power outlet. »» [0:00] blinks.
Replace a plug converter
Power on
Press the power and volume knob. »» The product is powered on and switches to the last mode.
Switch to standby mode
Press the power and volume knob again. »» If the clock is neither manually set nor automatically synchronized with a DAB radio station, [0:00] blinks.
1 2 3
6
Press down the clip. Pull the plug converter out.
EN
»» If the clock is manually set or automatically synchronized with a DAB radio station, the time and date is displayed.
Adjust brightness
Press BRIGHTNESS repeatedly to adjust the brightness of the LCD display.
EN
7
4 Set time and date
Note •• To manually set the clock, switch the product to
standby mode first.
1 2 3 4 5 6
In standby mode, press and hold until [Set time] is displayed. »» [Time saved] flashes, and then the set clock and date are displayed.
Tip
•• When a DAB radio station that transmits time signals is
broadcast, the product synchronizes its clock with the DAB radio station automatically.
8
EN
5 Use the alarm timer
Note •• Make sure that you have set the clock correctly.
6
Press / to select the volume level, and then press to confirm. »» [Alarm Saved] flashes.
Deactivate a preset alarm 1 2 3
Press AL1 (or AL2) to view alarm settings. »» AL1 (or AL2) is displayed when the preset alarm is activated. »» AL1 (or AL2) disappears when the preset alarm is deactivated.
Set an alarm
You can set two alarms.
1
Press and hold AL1 (or AL2) for two seconds. adjust its position.
4
Press / repeatedly to select a station, and then press PRESET to start listening.
Tip
•• You can re-scan to update the list of stored stations •• You can tune to a station manually (see 'Tune to a
station manually' on page 13). (see 'Re-scan for stations' on page 13).
About special symbols
Some symbol may be displayed before the name of a station. • : The station is a secondary station.
Switch to DAB mode
Tune to a stored radio station 1 2
Press SOURCE repeatedly until [DAB Mode] is displayed. Press PRESET to start listening.
Program radio stations 1 2 3 4 5
• Tune to a DAB radio station. »» The radio station is stored with the selected sequence number. To tune to a stored radio station, press PRESET to access the list of stored radio stations, and then press / repeatedly.
For the first time use 1 2 3
Press SOURCE repeatedly to switch the product to DAB mode. »» This product automatically stores radio stations with sufficient signal strength. »» After the search is complete, the first stored radio station is broadcast automatically.
12 EN
Note •• If you store a radio station with the sequence number
of another one, the earlier one is overwritten.
Tune to a station manually
With this feature, you can tune to a specific channel/frequency manually. Connect an audio input cable with a 3. 5 mm connector on both ends to • the AUDIO-IN socket on the back panel of this product, and • the headphone socket on the external device. Play audio on the external device (refer to its user manual).
3
EN
15
9 Use system menus
Use the system menus to • check the version of current software of this product, • upgrade the software, and • reset the product to factory default status.
Reset the product
1 2
Press
to display the options.
Check the current software version
3
Press / repeatedly to select an option. Press to confirm the option.
Press to display the version of current software.
Upgrade the software
1 2
Go to www. philips. com/support. [. . . ] When you contact Philips, make sure that the product is nearby and the model number and serial number are available. No power •• Make sure that the AC power cord is properly connected. •• When listening to an external device, make sure that the external device is not muted. No response from the product • Make sure that the power is available. [. . . ]