[. . . ] ENGLISH ITALIANO ESPAÑOL FRANCAIS DEUTSCH ΕΛΛΗΝΙΚΆ PORTUGUESE
OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating your set and retain it for future reference.
TYPE : WALL MOUNTED
NEDERLANDS POLSKI MAGYAR
www. lg. com
P/NO : MFL67657201
2
TIPS FOR SAVING ENERGY
ENGLISH
TIPS FOR SAVING ENERGY
Here are some tips that will help you minimize the power consumption when you use the air conditioner. You can use your air conditioner more efficiently by referring to the instructions below: • Do not cool excessively indoors. • Block sunlight with blinds or curtains while you are operating the air conditioner. • Keep doors or windows closed tightly while you are operating the air conditioner. [. . . ] You will find the buttons for the additional functions under the cover of the remote control.
Wireless remote control
Control Display panel screen
Description IONIZER button*: Plasmaster Ionizer sterilize the aerial bacteria and other harmful substances. Temperature adjustment buttons: Adjusts the room temperature when cooling and heating.
A
Display screen
K
l
_
| g
-
On/Off button: Turns the power on/off. Make sure to point the remote control towards the signal receiver of the air conditioner. • For proper operation, use a soft cloth to clean the signal transmitter and receiver.
10 BASIC FUNCTIONS
ENGLISH
BASIC FUNCTIONS
Cooling your room
(Cooling operation) 1 Press | to turn on the power. - A is displayed on the display screen.
Removing humidity
(Dehumidifying operation)
This mode removes excess moisture from an environment with high humidity or in the rainy season, in order to prevent mold from setting in. This mode adjusts the room temperature and the fan speed automatically to maintain the optimal level of humidity. - D is displayed on the display screen.
3 Press G or H to set the desired temperature. - The temperature range is 18°C (64°F) ~ 30°C (86°F).
Heating your room
(Heating operation) 1 Press | to turn on the power. - B is displayed on the display screen.
!
NOTE
• In this mode you cannot adjust the room temperature, as it is adjusted automatically. Also, the room temperature is not displayed on the display screen.
3 Press G or H to set the desired temperature. - The temperature range is 16°C (60°F) ~ 30°C (86°F).
!
NOTE
Cooling-only models do not support this function.
BASIC FUNCTIONS
11
ENGLISH
Airing your room
(Air Circulation operation)
This mode only circulates the indoor air without changing the room temperature. - E is displayed on the display screen.
Adjusting the air flow direction
1 To adjust the direction of the air flow horizontally, press D repeatedly and select
the desired direction. 2 To adjust the direction of the air flow vertically, press E repeatedly and select the desired direction. - Select J to adjust the direction of the air flow automatically.
!
NOTE
3 Press g to adjust the fan speed.
Adjusting the fan speed
1 Press g repeatedly to adjust the fan
speed. Remark Speed High Medium-High Medium Medium-Low Low Natural Wind
• Adjusting the air flow direction vertically may not be supported, depending on the model. • Adjusting the air deflector arbitrarily may cause product failure. • If you restart the air conditioner, it starts to operate with the previously set direction of air flow, so the air deflector may not match the icon displayed on the remote control. When this occurs, press D or E to adjust the direction of the air flow again.
Setting the timer
You can use the timer function to save energy and to use the air conditioner more efficiently.
Setting the current time
1 Press p and hold it for longer than 3 seconds. - The AM/PM icon flickers at the bottom of the display screen.
12 BASIC FUNCTIONS
ENGLISH
2 PressEorFto select the minutes. 3 Press p to finish.
Canceling the timer setting
1 Press p.
- To cancel all timer settings, press p.
Turning on the air conditioner automatically at a set time
1 Press m.
- The icon below flickers at the bottom of the display screen.
Setting sleep mode
Use the sleep mode to turn off the air conditioner automatically when you go to sleep. - T is displayed on the display screen in sleep mode.
2 PressEorFto select the minutes. 4 When setting the timer, current time and
ON icon are displayed on the display screen indicating that the desired time is set.
Turning off the air conditioner automatically at a set time 1 Press n.
- The icon below flickers at the bottom of the display screen.
!
NOTE
In the Cooling and Dehumidifying modes, the temperature increases by 1°C after 30 minutes and by a further 1°C after another 30 minutes for a more comfortable sleep. [. . . ] Clean the electric components with jets of air.
MAINTENANCE 19
ENGLISH
Cleaning the Plasmaster Ionizer(Optional) • Turn off the power and unplug the power cord. Note : The plasmaster ionizer may not be included in some models.
!CAUTION
• Turn off the power and unplug the power cord before you perform any maintenance; otherwise it may cause electric shock. • Never use water that is hotter than 40°C when you clean the filters. [. . . ]