[. . . ] For parts with this sign, • This sign is for displaying risks involving electric shock under certain conditions. user must read the manual carefully and follow instructions in order to avoid risks. LED FLAT LIGHT 53W/60W Advantages Replacing existing lighting devices with the LED FLAT LIGHT can reduce energy costs by 30% or more. Existing lamp LG FLAT 53W of planting 17 trees WARNING CAUTION ※ If used 12 hours each day for a year ※ Conversion constant 0. 573 kgCO2/Kwh, 3. 86kgCO2/tree) ● Violation of warnings may lead to serious injury or death. ● Violation of precautions may lead to light injury or product damage. User Manual 34% - 70% WARNING Product is heavy. [. . . ] Do not use the product if impurities are present in the product or if the product is submerged. • Risk of product malfunctioning. Converter < 600 x 600 Type > < 300 x 1200 Type > 1 Drill and prepare the ceiling so the hole is smaller than the product. 2 Connect the 3 product cables to the interior wiring of the building. For wire connectors, use standardized products. 3 Rotate the connected product by 20 degrees. • Make sure that all 4 sides of the product match the T-bar. Must fix the product properly on the ceiling. Product Size Must have at least two or more people working during installation. • Risk of product dropping and causing injury to the user. T: 596/620 M: 620 CAUTION Do not install where it may be exposed to direct sunlight, humidity, or dust. Alcohol Benzene T: 1256 M: 1270 T: 596/620 M: 620 94 T: 94/96 M: 96 T: 296 M: 310 Do not disassemble or arbitrarily remodel the product. (Underwater landscape, searchlight, fishing, events, etc. ) • Risk of fire and electric shocks. If the lamp turns off by itself, do not disassemble the product. • Risk of electric shock and product malfunctioning. Do not clean the product with inflammable substances such as alcohol, benzene, and acetone that may alter the surface. *Unit: mm T : T -BAR M : M-BAR 4 Place the horizontal product into the T-bar. 5 Ensure the inserted product is horizontal. 6 Once installation is complete, turn on the power switch to check it is operating properly. • After the installation is complete, remove the protective sheet. Check the following before requesting repair service 2. M-BAR • Make sure to turn the main power switch of the installation space before connection. (LIVE: BROWN, NEUTRAL: BLUE, P. E. : GREEN/YELLOW) • When this luminaire is connected to branch circuit, installation engineer must use the connector that is flame retardance of UL-94 V0 or higher. • Use woodscrews provided by LG Electronics. Model Information Category 3000K T-Bar M-Bar 4000K 600x600 Type 5000K T-Bar M-Bar T-Bar M-Bar 5700K T-Bar M-Bar 3000K T-Bar M-Bar 4000K 300x1200 Type 5000K T-Bar M-Bar T-Bar M-Bar 5700K T-Bar M-Bar 53W LF53073032*. C00***0 LF53173032*. C00***0 LF53074032*. C00***0 LF53174032*. C00***0 LF53075032*. C00***0 LF53175032*. C00***0 LF53075732*. C00***0 LF53175732*. C00***0 LF53175732*. C00***0 LF53173042*. C00***0 LF53074042*. C00***0 LF53174042*. C00***0 LF53075042*. C00***0 LF53175042*. C00***0 LF53075742*. C00***0 LF53175742*. C00***0 60W LF60074032*. D00***0 LF60174032*. D00***0 LF60075032*. D00***0 LF60175032*. D00***0 LF60075732*. D00***0 LF60175732*. D00***0 LF60074042*. D00***0 LF60174042*. D00***0 LF60075042*. D00***0 LF60175042*. D00***0 LF60075742*. D00***0 LF60175742*. D00***0 Symptom It won’t turn on. Check Check to see if the power is connected or Check to see if the dimming wires has short-circuited. Category Watts Light Color (CCT) Light Output (Lumens) 3000 3600 68 Color Accuracy (CRI) Beam Angle 53W 53. 0 4000 3800 72 5000 4000 76 5700 3900 74 80 82 T-Bar : 596(W) x 596(D) x 94(H) 620(W) x 620(D) x 96(H) M-Bar : 620(W) x 620(D) x 96(H) T-Bar : 296(W) x 1256(D) x 94(H) M-Bar : 310(W) x 1270(D) x 94(H) 5 AC 110 - 240 ~ 50 / 60 Single-Phase Three-Wire System 4000 4600 77 60W 60. 0 5000 4900 82 5700 4800 80 Unit W K Im Im/W LIVE NEUTRAL P. E. Interior wiring of the building Wire connectors 114 ˚(degrees) Product’s power cables 1 Drill and prepare the ceiling so that the hole is smaller than the product. 2 Connect the 3 product cables to the interior wiring of the building. [. . . ] (SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TOYOU. ) ※ This dimming terminal is for cable dimming control use (0-10V). ※ Please check the polarity of terminal as shown in the wiring diagram before connecting the dimming wires. [. . . ]