[. . . ] Please read this manual carefully before operating your set and retain it for future reference. νικά Slovenščina
LANGUAGE
B-1 MAKING CONNECTIONS
B-1 B-3 B-4 B-6 B-7 B-9 B-11 B-12 B-14 B-14 B-17 B-19 B-21 B-24 Antenna connection Satellite dish connection HDMI connection - ARC (Audio Return Channel) DVI to HDMI connection Component connection Composite connection MHL connection Audio connection - Digital optical audio connection USB connection CI module connection Headphone connection Euro Scart connection
B-33 SPECIFICATIONS
COMMON
SETTING UP THE TV A-3
Setting up the TV
Image shown may differ from your TV. Attaching the stand
LA62**, LA64**, LA66**, LN57**-ZE/ZK
1
4 EA M4 x 14
3
(Only LA62**, LN57**-ZE/ZK)
Stand Body
Front
Stand Base
M4 x 14 4 EA
2
(Only LA62**, LN57**-ZE/ZK) (Only LA64**, LA66**)
(Only LA64**, LA66**)
M4 x 14 4 EA
A-4 SETTING UP THE TV
LA69**, LA74**
3
1
Stand Base
M4 x 20 4EA
2
SETTING UP THE TV A-5
LN57**-ZA
1
Stand Body
3EA P5 x 25
CAUTION
yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. Yy Make sure that the screws are inserted correctly and fastened securely. [. . . ] Yy Before moving or lifting the TV, disconnect the power cord and all cables. Yy When holding the TV, the screen should face away from you to avoid damage. Yy When transporting the TV, do not expose the TV to jolts or excessive vibration. Yy When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. Yy Do not apply excessive pressure to cause flexing /bending of frame chassis as it may damage screen. Make sure not to hold the transparent part, speaker, or speaker grill area. 18 ASSEMBLING AND PREPARING
Mounting on a table
1 Lift and tilt the TV into its upright position on a table. -- eave a 10 cm (minimum) space from the L wall for proper ventilation. Securing the TV to a table Fix the TV to a table to prevent from tilting forward, damage, and potential injury. To secure the TV to a table, insert and tighten the supplied screw on the rear of the stand. (Only 32/39/42/47/50/60LN57**-ZA)
ENGLISH ENG
10 cm
10 cm
m 10 c 10 cm
10 cm
2 Connect the power cord to a wall outlet. (Only 32/39/42/47/50LN57**-ZE/ZK, 32/39/42/47/50LA62**, 32/42/47/50LA64**, 32/42/47/50LA66**)
CAUTION
yy Do not place the TV near or on sources of heat, as this may result in fire or other damage. σ
Using the Kensington security system (This feature is not available for all models. Yy The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www. Connect the Kensington security system cable between the TV and a table. 2 EA , P4 x 8 (Only 47/50LN57**-ZE/ZK , 47/50LA62** , 47/50LA64** , 47/50LA66**) 2 EA , M4 x 8 (Only 32/39/42LN57**-ZE/ZK , 32/39/42LA62** , 32/42LA64** , 32/42LA66**)
ASSEMBLING AND PREPARING
19
NOTE
(Only 32/39/42/47/50LN57**-ZE/ZK , 32/39/42/47/50LA62** , 32/42/47/50LA64** , 32/42/47/50LA66**) How to fix the TV to a table 1. Connect the Desk-mount Cables to the Stand Base using the Bracket Screws. Adjusting the angle of the TV to suit view (This feature is not available for all models. ) Swivel 15 degrees to the left or right and adjust the angle of the TV to suit your view. (Only LA62**, LA64**, LA66**, LN57**-ZE/ZK)
ENGLISH ENG
15
15
WARNING
yy To prevent TV from falling over, the TV should be securely attached to the floor/ wall per installation instructions. Swivel 10 degrees to the left or right and adjust the angle of the TV to suit your view. [. . . ] When changing AV MODE with a headphone yy connected, the change is applied to video but not to audio. (Depending on model) Optical Digital Audio Out is not available yy when connecting a headphone. HINWEIS
English Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable as shown. [. . . ]