[. . . ] Most cable companies use STD. NN If you have connected your TV to a cable or satellite set top box, you do not need to run the Auto Program function. ▶ English ■■ Auto Program OO MENUm → Broadcasting → Auto Program → ENTERE Scans for channels automatically and stores them in the TV’s memory. To start Auto Program, follow these steps: 1. Select Auto Program, and then press ENTERE. 3. Select Both, Air, or Cable by highlighting, and then pressing ENTERE. ◀ ▶ English 4. If you selected Cable, you must specify your cable systems. Auto Program starts. NN After all the available channels are stored, Auto Program removes scrambled ◀ channels. [. . . ] (ex: Watching TV via set-top box, Satellite receiver, or etc) NN The current time will be set through a network, if the TV fails to receive English ❑❑ Using the Sleep Timer OO MENUm → System → Time → Sleep Timer → ENTERE ●● Sleep Timer t: Automatically shuts off the TV after a preset period of time. NN Use the ▲/▼ buttons to select a period of time, and then press ENTERE. To cancel the Sleep Timer, select Off. ◀ ▶ English ❑❑ Setting the On/Off Timer OO MENUm → System → Time → On Timer <or> Off Timer → ENTERE Set On Timer so that your TV turns on automatically at a time and on a day of your choosing. ●● On Timer: You can set up three separate On Timer configurations. NN You must set the clock before you can use On Timer. ◀ Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose the days you want On Timer to turn on your TV. ▶ NN The c mark indicates days you’ve selected. English Time: Set the hour, minute, am/pm. Source: To select the source of the content that will play when the TV turns on. ●● Select a source on your TV to which you have connected a set-top box, and have the TV display a channel from the set-top box. NN The USB device must be connected to your TV before you can select USB. ●● Select TV and have the TV display a specific air or cable channel. ●● Select USB and have the TV play back photo or audio files from a USB ▶ English NN If you select a source other than TV or USB, you must: goes on ●● Leave the set-top box turned on. NN When you select a source other than TV or USB, the Antenna and Channel options will disappear. Antenna (when the Source is set to TV): Select Air or Cable. ●● Have a cable or satellite set-top box attached to that source ●● Set the set-top box to the channel you want to watch when the TV ◀ Channel (when the Source is set to TV): Select the desired channel. Enter the current or default PIN. NN The default PIN number for a new TV set is “0-0-0-0”. NN If you forget the PIN code, press the remote control buttons in the following ▶ sequence in Standby mode. This resets the PIN to “0-0-0-0” : MUTE → 8 → 2 → 4 → POWER (on) English ■■ General OO MENUm → System → General → ENTERE ●● Game Mode: When you have connected a game console such as a PlayStation™ or Xbox™ to the TV, you can enjoy a more realistic gaming experience if you set Game Mode on. NN NOTE ◀ ●● Precautions and limitations for Game Mode: –– Before disconnecting a game console and connecting another external device, set Game Mode to Off. ▶ –– If you display the TV menu in Game Mode, the screen shakes slightly. English turn Game Mode on before you have attached the game console, you may notice reduced picture quality. ●● If Game Mode is On: –– Picture Mode is set to Standard and Sound Mode is set to Movie. ●● Boot Logo: Enable/disable displaying the logo while the TV starts up. ●● Game Mode is not available when you’ve set the input source to TV. If you ◀ ▶ English ■■ DivX® Video On Demand OO MENUm → System → DivX® Video On Demand → ENTERE Shows the registration code authorized for the TV. If you connect to the DivX web site and register with 10-digit registration code, you can download the VOD activation file. Once you play it using Media Play, the registration is completed. NN For more information about DivX® VOD, visit “http://vod. divx. com”. ◀ ▶ English ❑❑ Using the Source List ■■ Source List OO MENUm → Applications → Source List→ ENTERE NN When you press the SOURCE button, the Source screen is displayed at once. NN You can only choose external devices that are connected to the TV. [. . . ] -  nsure DHCP server is enabled on the router, and then unplug and E plug-in the router. - Contact your Internet Service Provider for more information. Unable to connect to the network. • Check if your IP address is set correctly in IP Settings. • Contact your Internet Service Provider for more information. ◀ ▶ English Issue Connected to your local network, but cannot connect to the Internet. Solutions and Explanations • Make sure your Internet LAN cable is connected correctly to the LAN port of the router. • If the problem persists, contact your Internet Service Provider to access the Internet. Network setup • Confirm that your router is connected to the Internet. [. . . ]