[. . . ] • Adjust the direction of the air flow vertically or horizontally to circulate indoor air. • Speed up the fan to cool or warm indoor air quickly, in a short period of time. • Open windows regularly for ventilation as the indoor air quality may deteriorate if the air conditioner is used for many hours. Dust and impurities collected in the air filter may block the air flow or weaken the cooling / dehumidifying functions.
For your records
Staple your receipt to this page in case you need it to prove the date of purchase or for warranty purposes. [. . . ] • Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system. • Do not use strong cleaning agents or solvents when you clean the air conditioner, or spray water. • Never touch the metal parts of the air conditioner when you remove the air filter. • Do not insert hands or other objects through the air inlet or outlet while the air conditioner is operating. • Use a sturdy stool or ladder when you clean, maintain or repair the air conditioner at a height. • Do not mix the batteries for the remote control with other types of batteries or mix new batteries with used batteries. • Stop using the remote control if there is a battery fluid leak. If your cloth or skin is exposed to the battery fluid from a leak, wash it off with clean water. • If you swallow the battery fluid from a leak, wash out the inside of your mouth thoroughly and then consult a doctor. Failure to do so may result in serious health complications.
Operation ranges
The table below indicates the temperature ranges the air conditioner can be operated within. - J is displayed on the display screen.
Changing room temperature quickly
(Jet Cool/Heat operation)
This mode allows you to cool indoor air quickly in summer or warm it quickly in winter. 2 Press M.
H
- If you turn off the power, the fan operates for 30 minutes and cleans the inside of the indoor unit. - In jet cooling mode, strong air blows out at a temperature of 18°C (64°F) for 30 minutes. - In jet heating mode, strong air blows out at a temperature of 30°C (86°F) for 30 minutes.
!
NOTE
Some buttons cannot be used while the auto cleaning function is in operation.
!
NOTE
• In Air Circulation, Auto, or Auto Changeover mode, this function cannot be used. • This function may not be supported, depending on the model.
14 ADVANCED FUNCTIONS
ENGLISH
Plasmaster Purification operation (optional)
Ion particles from Plasmaster Ionizer developed by LG sterilize the aerial bacteria and other harmful substances. - K is displayed on the display screen.
Code 2 1 0
-1 -2
Description Cool Cool slightly Maintain room temperature Heat slightly Heat
!
NOTE
• In this mode, you cannot adjust the fan speed, but you can set the air deflector to rotate automatically. • This function may not be supported, depending on the model.
!
NOTE
Auto Changeover operation
This mode changes the operation mode automatically to maintain the set temperature at ±2°C. - C is displayed on the display screen.
• You can use this function by pressing A without turning the air conditioner on. • Do not touch Plasmaster ionizer during operation.
Auto operation
(Artificial intelligence) Cooling-only models
In this mode, the fan speed and the temperature adjust automatically, based on the room temperature. 3 PressG or Hto select the desired operation code if the temperature is higher or lower than the desired temperature.
3 PressG or Hto set the desired temperature. 4 Press g repeatedly to select the fan speed.
!
NOTE
This function may not be supported, depending on the model.
ADVANCED FUNCTIONS 15
ENGLISH
Silent mode
It is to prevent potential claims by neighbors, reducing noise from outdoor units. [. . . ] 1 Dry the air conditioner in Fan mode for 3 to 4 hours and disconnect the power plug. 2 Before using the air conditioner again, dry the inner components of the air conditioner in Fan mode for 3 to 4 hours. Clean the product regularly to maintain optimal performance and to prevent possible breakdown. * This may not be provided, depending on the model.
3M Micro Protection Filter
Air filter
Plasmaster Ionizer
* The feature can be changed according to type of model.
Type
Description
Interval 2 weeks 6 months 1 months Regularly Every 4 months Once a year Once a year Once a year Regularly Once a year Once a year Once a year Once a year Once a year
Air filter See “Cleaning the filter. ” Plasmaster See “Cleaning the Plasmaster ionizer” ionizer 3M Micro See ” Cleaning the 3M Micro Protection Filter ” Protection Filter Clean the Indoor unit surface by using a soft, dry cloth. [. . . ]