[. . . ] Application s The unit with the working equipment must be checked to ensure it is in perfect working order and safe for operation before use. Please dispose of scrapped units environmentally-responsibly Scrapped units consist of valuable recyclable materials that should be taken to a recycling centre. Batteries, oil and similar products must not be allowed to contaminate the environment. [. . . ] S Screw the high pressure hose (4) to the outlet of the HP-injector (2) and tighten hand tight. Tighten the injector cartridge hand tight with a flat screwdriver 12x2. 13
English
s Unscrew the standard injector cartridge
with a flat screwdriver 12x2. S Push O-rings (3) onto the injector
1b) Assembly with HD 10/25 SX, HD 13/18 SX
s Switch off the high pressure cleaner. Cartridge from the nozzle set (4) and coat with a thin layer of silicone grease. Tighten the injector cartridge hand tight with a flat screwdriver 12x2. *Part of the nozzle pack
s Unscrew the fastening screw (1) of the
hood. 1c) Assembly in heated units Here the existing dosing system in the unit is used. *Part of the nozzle pack
s Unscrew the sealing screw (1) with a
size 8 Allen key. Mount the switchable jet pipe (only with the Inno-Foam-Set)
s Unscrew the standard jet pipe from the
3. To the Foam Set, – on the short pipe of the switchable jet pipe, or – replace the standard high pressure nozzle by a foam nozzle. S Screw the pre-assembled foam
nozzle (1) to the jet pipe (5) and tighten it with an open-ended wrench size 27. 15
English
Recommended cleaning agents
RM 57 ASF Foam cleaner , neutral Foam cleaner for slightly greasy , oily- and protein contamination. RM 58 ASF Foam cleaner, alkaline Foam cleaner for cleaning floor and wall tiles and containers. [. . . ] S Clean the stainless steel grille for
A* = position B* = CHEM (%)
10 minutes in boiling water or overnight in the ultrasonic bath. 80
Svenska
Montering
Erforderliga tillbehörsdelar
s För att anpassa Foam-Set till respektive
Munstyckspaket för andra högtrycksaggregat utan slangvinda med flöden från:
högtrycksaggregat, måste dessutom ett munstyckspaket beställas:
över 500 till 600 l/h (över 8, 3 till 10 l/min) över 600 till 700 l/h (över 10 till 11, 8 l/min) för HD 10/25 SX för HD 13/18 SX 2. 640-695 över 700 till 1000 l/h (över 11, 6 till 16, 6 l/min) över 1000 till 1300 l/h (över 16, 6 till 21, 6 l/min) HD 1000 Si
2 640-870
2 640-687
2 640-688
2 640-689 2. [. . . ]