[. . . ] : +49 7195 14-0 Fax: +49 7195 14-2212 Winnenden, 2010/07/14
DE - 13
15
Please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subsequent owners. Before first start-up it is definitely necessary to read the safety indications Nr. Safety instructions
General notes
Your sales outlet should be informed about any transit damage noted when unpacking the product. Warning and information plates on the machine provide important directions for safe operation. [. . . ] Note: To achieve an optimum cleaning result, the driving speed should be adjusted to take specific situations into account. Note: During operation, the waste container should be emptied at regular intervals. Drive the machine
Emptying waste container
Note: Wait until the filter shaking process is finished and the dust has settled before you open or empty the waste container. Note:Once the machine has been switched off, the dust filter is shaken automatically for approx. Note: The machine has been fitted with an automatic parking brake that is activated as soon as the engine is switched off and the driver leaves his seat. Do not clean the appliance with a water hose or high-pressure water jet (danger of short circuits or other damage). External cleaning of the appliance Clean the machine with a damp cloth which has been soaked in mild detergent. When loading or unloading the machine, it may only be operated on gradients of max. The engine requires 15 seconds to come to a standstill once it has been switched off. Allow the machine sufficient time to cool down before carrying out any maintenance and repair work. Shutdown
If the sweeper is going to be out of service for a longer time period, observe the following points: Park the sweeper on an even surface. The roller brush and side brushes are raised to prevent the bristles being damaged. Maintenance intervals
Note: The elapsed-time counter shows the timing of the maintenance intervals. Maintenance by the customer Daily maintenance: Check the sweeping roller and the side brush for wear and wrapped belts. Weekly maintenance: Check for smooth running of the Bowden cables and the moveable parts Check the sealing strips in the sweeping area for position and wear. When carrying out repairs on public highways, wear warning clothing when working close to passing traffic. Also secure the machine with wheel chock(s) to prevent it rolling away. Use suitable, commercially available materials to carry out tyre repairs. The journey may be resumed providing that the directions supplied by the product manufacturer have been observed. The tyre/wheel change should nonetheless be carried out as soon as possible. Raise slightly the waste container on the appropriate side and pull it out. Secure the machine with wheel chock(s) to prevent it from rolling away. [. . . ] Poor cleaning performance at edges Replace side brush Check sealing strips for wear, adjust or replace as required Inform Kärcher Customer Service. Side brush or roller brush switch- Check vacuum pressure system to see it is leak-proof. Insufficient vacuum performance Check filter case seal Check sealing cover on suction fan Check hoses of suction blower for absence of leakness. Fault Appliance cannot be started
26
EN - 11
Technical specifications
KM 100/100 R D Machine data Length x width x height Unladen weight Transport weight Permissible overall weight Driving speed Cleaning speed Climbing capability (max. [. . . ]