[. . . ] Turn on: please dial the button to “ON”, The LED flashes Blue and a signal rings. Prepare your BS100 for pairing: press the “Phone button” during 6 seconds, until the LED flashes red and blue. Answer/End call: press the “Phone button” on your BS100 to both answer and end a call. [. . . ] Reject an incoming call: press the “Phone button” during 3 seconds. Redial last number: press the “Phone button” during 3 seconds when the BS100 is in stand-by mode. Voice activated dialing: it’s possible to make a call directly from the BS100 using voice recognition. To use this feature, your mobile phone must provide this option, and corresponding voice samples must have been recorded. Voice transfer: press and hold the “Phone Button” during 3 seconds when you’re in communication, until you hear a stone sound and then transfer to phone. Troubleshooting: If you cannot connect the speaker to your phone, do as follows: - Ensure that the speaker is charged, switched on, paired with and connected to your phone. - Check that the headset is within 10 meters of your phone and that there are no obstructions between the headset and the phone, such as walls or other electronic devices If no paring is made over a period of time, the Bluetooth speaker will retreat paring mode. No warranty coverage may be claimed if the device’s serial number has been modified, removed, erased, or made illegible. No warranty coverage may be claimed if the device has been repaired, altered, or modified by the buyer or any repair personnel not officially qualified and authorized. The manufacturer does not guarantee the technical properties described in this manual. The hardware and accessories described in this manual are subject to change without advance notice. For this reason, the manufacturer reserves the right to change the related documents, components, options, and characteristics without advance notice. Compliance with current regulations: This device complies with current CE marking standards, and is compatible with the RoHS standard. Recycling end-of-life electrical equipment and electronics: Used electrical and electronic devices must not be discarded with ordinary household refuse. [. . . ] Compliance with current regulations: This device complies with current CE marking standards, and is compatible with the RoHS standard. Recycling end-of-life electrical equipment and electronics: Used electrical and electronic devices must not be discarded with ordinary household refuse. The presence of the symbol on the product or its packaging serves as a reminder of this. [. . . ]