[. . . ] You are responsible for making sure that your vacuum cleaner is not used by anyone unable to operate it properly. Use only with Dyson recommended or approved attachments and accessories. Check to ensure your electricity supply corresponds to that shown on the rating plate, which can be found on the base of the machine between the wheels. If the machine is not functioning properly, has been dropped, damaged, left outdoors, or immersed in liquid, contact the Dyson Helpline on 1- 866 - 693 - 9766. [. . . ] If you need assistance to assemble or operate it, please call the Dyson Helpline on 1- 866 - 693 - 9766. Press catch 1 to release wand and extend it fully until the wand cuffs click. Click the tools onto the machine. 3 11323_DC11_USA_OWNER_MAN. qxd p1 9/23/04 2:43 PM Page 4 Storing your DC11 1 2 3 4 Storing your DC11 Remove the floor tool from the wand. To attach the wand to the machine, clip catch 1 between bins then press catch 2 to click it into place. Please do not park the wand in an upright position, as it’s not designed for this. 4 Dyson Helpline contact us on 1-866-693-9766 11323_DC11_USA_OWNER_MAN. qxd p1 9/23/04 2:43 PM Page 5 Using your DC11 WARNING • To reduce the risk of electric shock and personal injury, this appliance has a polarized plug (one blade wider than the other). If it still does not fit, contact a qualified electrician to install the proper outlet. CAUTION • Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts. • Fine dust such as plaster dust or flour should only be vacuumed in small amounts. 1 Using your DC11 Extend the cable fully up to the red tape. To adjust the wand length, press catch 1 to slide the handle in or out. The floor tools fit into the end of the wand, the wand handle or the hose. Empty the clear bins as soon as either one reaches the max mark (see page 9). TM 5 11323_DC11_USA_OWNER_MAN. qxd p1 9/23/04 2:43 PM Page 6 Using your DC11 The tools clean upholstery, curtains and stairs. The tools fit the wand, wand handle and hose. Hold the cable rewind button down to rewind the cable. Do not allow plug to whip when rewinding. 6 Dyson Helpline contact us on 1-866-693-9766 11323_DC11_USA_OWNER_MAN. qxd p1 9/23/04 2:43 PM Page 7 Using your tools 1 2 clean air turbine head bare floor tool mini turbine head Using your tools Clean air turbine head When you start the machine the Turbine head is already in carpet mode. To return to carpet mode, pull out the button or turn the machine off. Optional Mini turbine head Cleans hair from confined spaces such as the car. 2 Attach the complete tool to the end of the wand. 7 11323_DC11_USA_OWNER_MAN. qxd p1 9/23/04 2:43 PM Page 8 Carrying your DC11 Carrying your DC11 Crevice tool Reaches into nooks and crannies. For your safety do not press the cyclone release catch when carrying your machine. • Ensure the cyclone pack and wand handle are firmly secured to the base. • Ensure the hose has clicked into place on both sides. 8 Dyson Helpline contact us on 1-866-693-9766 11323_DC11_USA_OWNER_MAN. qxd p1 9/23/04 2:43 PM Page 9 Emptying your DC11 2 1 Emptying your DC11 CAUTION • Disconnect the machine from the electrical outlet before emptying the bin. • Do not use the machine without the clear bins in place. TM Press the red catch 1 to release the cyclone pack. Press catch 2 to empty the bins. To re-assemble the bin bases, squeeze the hinges at the back. Replace the cyclone pack firmly onto the machine. Empty the clear bins as soon as either one reaches the max mark. 9 TM 11323_DC11_USA_OWNER_MAN. qxd p1 9/23/04 2:43 PM Page 10 Emptying your DC11 When necessary Optional 3 Press catch 3 to remove the bins. CAUTION • Do not rinse the cyclones in water. [. . . ] • Clearing blockages is not covered by your machine’s limited warranty. A B C Blockages Check A and B to ensure nothing is obstructing the ducts. CAUTION • Make sure all parts have been replaced securely before using your machine. 13 11323_DC11_USA_OWNER_MAN. qxd p1 9/23/04 2:43 PM Page 14 Blockages 1 1 2 2 1 3 3 4 4 5 5 Clean air turbine head Press catch 1 to release cyclone pack. 5 To re-assemble, align the arrows on each brushbar in the same direction, click and fasten the soleplate into place. 14 Mini turbine head 1 Release the catches. 5 To re-assemble, align the arrows on each brushbar in the same direction, click and fasten the soleplate into place. Dyson Helpline contact us on 1-866-693-9766 11323_DC11_USA_OWNER_MAN. qxd p1 9/23/04 2:43 PM Page 15 Important safety instructions 1 3 5 7 2 4 6 8 Important safety instructions 1 Do not pull the cable. [. . . ]