[. . . ] Never use the deep fryer with the oil below the "min" level as this could cause the thermal cutout to trip. To replace it, contact an authorised service centre. If you are using solid fat, cut into small pieces to avoid the deep fryer heating up without liquid for the first few minutes. The temperature must be set to 150°C until the fat has melted completely. You can then set the required temperature.
Starting frying
Plug into the mains socket and turn the pointer to the required temperature. When the thermostat light goes out, lower the basket (containing the food) into the oil and close the lid. [. . . ] As with any deep fryer, the oil deteriorates after being heated a number of times!Even if used and filtered correctly, it should therefore be changed completely on a regular basis. You should ideally change the oil completely after frying for 5/8 times and always in the event of: Unpleasant smell; smoke during frying; the oil becomes dark. Before cleaning or maintenance, turn the appliance off and allow to cool down. You should filter the oil or fat each time you fry, especially if you cook food in breadcrumbs or flour. Food particles left in the liquid tend to burn and may cause the oil or fat to deteriorate more rapidly. Make sure the oil is sufficiently cold (wait about two hours).
Cleaning
Before cleaning, always unplug from the mains socket. Never immerse the deep fryer in water and never place it under running tap water. To remove the lid, push backwards and at the same time lift upwards. Wash the bowl in hot water and washing up liquid. For models with non-stick bowl, never use abrasive objects or detergents to clean the bowl. Clean with a soft cloth and neutral detergent only.
5
Electric deep fryer F27series
Safety warnings
· Before using the appliance, check that the voltage of the mains power supply corresponds to the value indicated on the appliance rating plate. · Connect the appliance to an earthed power supply and sockets with a minimum current rating of 10 A only. (If the plug fitted to the appliance does not match the power socket, have the socket replaced with a suitable type by a qualified professional). · The power cable of this appliance must not be replaced by the user as this requires the use of special tools. If the power cable is damaged, it must be replaced by the manufacturer, an authorised service centre or a qualified professional in order to eliminate all risk. · Do not move the deep fryer when the oil is hot as this may cause serious burns. · If oil leaks from the deep fryer, contact a technical service centre or personnel authorised by the manufacturer. · Before using the deep fryer for the first time, wash the bowl, basket and lid in hot water and washing up liquid. At the end of the operation, dry everything thoroughly and remove any water left in the bottom of the bowl. This prevents dangerous splashes of hot oil during operation. · The appliance is not intended for use by young children or unfit persons without supervision. Young children should be supervised to ensure they do not play with the appliance. · To move the appliance, use the recesses at the bottom on all four sides. · Never leave the power cable dangling from the work surface as it could be grabbed by children or get in the way of the user. [. . . ] If your electricity supply point has only two pin socket outlets, or if you are in doubt, consult a qualified electrician. Should the mains lead ever require replacement, it is essential that this operation be carried out by a qualified electrician and should only be replaced with a flexible cord of the same size. After replacement of a fuse in the plug, the fuse cover must be refitted. If the fuse cover is lost, the plug must not be used until a replacement cover is obtained. [. . . ]