[. . . ] The and keys make it easy for you to change your time and temperature settings. Batteries are not required because your time and temperature settings are held permanently in memory. 2 69-1181 SETTINGS Setting Fan and Heat System Switches To control the Fan and Heat settings, adjust the Fan and Heat switches located on the top of the thermostat wallplate. Then set the Heat System switch: HEAT: Use normal setting for months when your home needs heating. [. . . ] Batteries are not required because your time and temperature settings are held permanently in memory. 2 69-1181 SETTINGS Setting Fan and Heat System Switches To control the Fan and Heat settings, adjust the Fan and Heat switches located on the top of the thermostat wallplate. Then set the Heat System switch: HEAT: Use normal setting for months when your home needs heating. Heating is off. OFF: If you have a Fan Switch, set this first: AUTO: ON: The fan starts a few minutes after the heating equipment comes on. The fan runs continuously for improved air circulation and air quality. 3 69-1181 PROGRAMMING The thermostat is already programmed for your convenience with time and temperature settings. Period WAKE SLEEP Start Time 6:00 AM 10:00 PM Heating Setpoint 70°F (21°C) 62°F (16. 5°C) Preprogrammed Time and Temperature settings. To use the preprogrammed Time and Temperature setting you must first set the current time. Check power to the heating equipment. Temperature setting is too warm or too cool. Displays only time and not temperature. Adjust the temperature by pressing either the Check that switch to furnace is on. or key. Check that the thermostat is properly latched on wallplate. The current time is maintained up to 20 minutes after power interruption. Reset clock. 9 69-1181 If you have any questions concerning this thermostat, call Honeywell Customer Assistance at 1-800-468-1502, Monday - Friday, 7:00 am - 5:30 pm, Central time. For service, contact your local heating and cooling contractor: 10 69-1181 11 69-1181 Home and Building Control Honeywell Inc. [. . . ] Reset clock. 9 69-1181 If you have any questions concerning this thermostat, call Honeywell Customer Assistance at 1-800-468-1502, Monday - Friday, 7:00 am - 5:30 pm, Central time. For service, contact your local heating and cooling contractor: 10 69-1181 11 69-1181 Home and Building Control Honeywell Inc. [. . . ]