[. . . ] 60
Important safety instructions
Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that you follow the instructions mentioned in this manual and marked on the product. This projector is designed to operate safely within a mains voltage between 100 to 240 volts AC, but could fail if power cuts or surges of ±10 volts occur. In areas where the mains voltage may fluctuate or cut out, it is recommended that you connect your projector through a power stabilizer, surge protector or uninterruptible power supply (UPS). [. . . ] Use this to set the peak white level after you have previously adjusted the Brightness setting to suit your selected input and viewing environment. -30
0
+30
Adjusting Color
Lower setting produces less saturated colors. If the setting is too high, colors on the image will be overpowering, which makes the image unrealistic. Adjusting Tint
The higher the value, the more reddish the picture becomes. Adjusting Sharpness
The higher the value, the sharper the picture becomes. Adjusting Brilliant Color
This feature utilizes a new color-processing algorithm and system level enhancements to enable higher brightness while providing truer, more vibrant colors in picture. It enables a greater than 50% brightness increase in mid-tone images, which are common in video and natural scenes, so the projector reproduces images in realistic and true colors. When Off is selected, the Color Temperature function is not available. Selecting a Color Temperature
The options available for color temperature* settings vary according to the signal type selected. *About color temperatures: There are many different shades that are considered to be "white" for various purposes. One of the common methods of representing white color is known as the âcolor temperatureâ. A white color with a low color temperature appears to be reddish white. A white color with a high color temperature appears to have more blue in it. Press / to highlight the item you want to change and adjust the values by pressing / . Press MENU/EXIT to exit and save the settings
3D Color Management
In most installation situations, color management will not be necessary, such as in classroom, meeting room, or lounge room situations where lights remain on, or where building external windows allow daylight into the room. Only in permanent installations with controlled lighting levels such as boardrooms, lecture theaters, or home theaters, should color management be considered. Color management provides fine color control adjustment to allow for more accurate color reproduction, should you require it. Proper color management can only be achieved under controlled and reproducible viewing conditions. You will need to use a colorimeter (color light meter), and provide a set of suitable source images to measure color reproduction. These tools are not provided with the projector, however, your projector supplier should be able to provide you with suitable guidance, or even an experienced professional installer. the Color Management provides six sets (RGBCMY) of colors to be adjusted. When you select each color, you can independently adjust its range and saturation according to your preference. [. . . ] Cause Remedy
Plug the power cord into the AC power jack on the projector, and plug the power cord into the There is no power from the power cord. Attempting to turn the projector on again Wait until the cooling down process has during the cooling process. No picture Cause
The video source is not turned on or connected correctly. Remedy
Turn the video source on and check that the signal cable is connected correctly. [. . . ]