[. . . ] ®
ALL-ROUND Flashlight Expert
User Manual
Brightness Control
When the flashlight is turned on from off: • Flashlight will enter high output level when the head is parallel to the floor • Flashlight will enter medium output level when the head is at 45 degrees • Flashlight will enter low output level when the head is pointing straight down
Features
• CREE XP-G (R5) LED • Maximum output of up to 190 lumens • Highly effective current circuit board • High efficiency circuit enables maximum runtime of up to 27 hours • 3 presetted brightness levels • Active dimming system with auto-adjust function • Soft turn-on mode and low illumination for everyday usage • Convenient one-handed operation • Reverse polarity protection • Equipped with integrated lens • Constructed from aerospace grade aluminum alloy • Type III military grade hard anodizing • Special-made rhombic knurling for better grip • Waterproof in accordance with IPX-8 (2 meters submersible) • Tail stand ability
HIGH
MEDIUM LOW Notes:
1. [. . . ] When it detects a vertical position, micro-computer will decrease output so to save battery life, extending runtime of SENS up to 5-8 times.
LUMENS
190
2h
LUMENS
60
LUMENS
20
NOTICE
6h30min
27h
76m (Beam Distance) 1450cd (Peak Beam Intensity) 1. 5m (Impact Resistant)
(Waterproof AND Submersible)
The stated data has been measured in accordance with the international flashlight testing standards ANSI/NEMA FL1, using SYSMAX CR123 battery (3V, 1550mAh) under laboratory conditions. The data may vary in real-world use due to different battery usage or environmental conditions.
Notes:
1. When the flashlight switches from low to high level, the output will increase momentarily, allowing the user to observe distant targets. After the flashlight switches from low to high level, the brightness will decrease slowly to allow the user’s eyes to adapt.
Maintenance
Clean the threads twice a year with a clean cloth and coat with silicone grease.
IPX-8, 2m
Operation instructions
Battery installation
Insert one CR123 battery
All NITECORE® products are warranted for quality. DOA / defective products can be exchanged for replacement though a local distributor/dealer within the 14 days of purchase. After 14 days, all defective / malfunctioning NITECORE® products will be repaired free of charge for a period of 18 months from the date of purchase. After 18 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts. The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties. [. . . ] Turn OFF: Rotate the head of the flashlight in a counter-clockwise direction to turn it off.
Thanks for purchasing NITECORE! [. . . ]