[. . . ] Imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service or accessory parts, please register your product at or
contact
www. Extra Large Capacity
Ultra drying capabilities are at your fingertips!Capacity dryer circulates more air through your clothes, drying them faster for a wrinkle-free result. [. . . ] You have used rigid or stiff-walled flexible metal duct material, not plastic flexible duct. Indd Sec5:22
2013-08-20
3:14:01
CONNECTING THE INLET HOSE
Method1 - Using the Y Connector and Long Hose
The dryer must be connected to the cold water faucet using the new inlet hoses. If you have a washer water hose attached to the cold water faucet, Y-Connector unscrew and remove the hose. If space permits, attach the brass female end of the âYâconnector to the cold water faucet. Attach the straight end of the long hose to the âYâ connector. Using pliers, tighten the hose coupling with an additional two thirds Duct Exhaust turn. Attach the angled end of the long hose to the fill valve at the bottom of the dryerâs rear frame. Using pliers, tighten the hose coupling with an additional two thirds turn. Attach the water hose to the other side of the âYâ connector. Using pliers, tighten the coupling with an additional two thirds turn. Check for leaks around âYâ connector, faucets, and hoses. Check for leaks around âYâ connector, faucets and hoses. Method2 - Using the Short Hose, Long Hose, and Y Connector
The dryer must be connected to the cold water faucet using the new inlet hoses. If the âYâ connector cannot be attached directly to the cold water faucet, then you must use the short hose. If you have a washer water hose attached to the cold water faucet, (Inlet to cold unscrew and remove the hose. Screw on the âYâ connector coupling by hand until it is tight. Using pliers, tighten the coupling with an additional two thirds turn. Attach the âYâ connector to the stainless male end of the small hose. Using pliers, tighten the coupling with an additional two thirds turn. Attach the angled end of the long hose to the fill valve at the bottom of the dryer rear frame. Using pliers, tighten the coupling with an additional two thirds turn. Check for leaks around âYâ connector, faucets, and hoses. [. . . ] SAMSUNG does not warrant uninterrupted or error-free operation of the product. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific rights, and you may also have other rights, which vary from state to state. Com/ca_fr (French) Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. [. . . ]