[. . . ] If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Personal safety Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. [. . . ] Have repairs performed only by a qualified technician and only using original spare parts. Book Page 23 Friday, March 16, 2012 9:10 AM
English | 23 Children or persons that owing to their physical, sensory or mental limitations or to their lack of experience or knowledge, are not capable of securely operating the charger, may only use this charger under supervision or after having been instructed by a responsible person. Products sold in GB only: Your product is fitted with a BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362). If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorised customer service agent. The replacement plug should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere. product Description and Specifications
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Intended Use
The power tool is intended for tacking fabrics, leather, card board, foils, insulation material and other materials to soft structural surfaces, such as wood or wood-like materials. The power tool is not suitable for fastening wall or ceiling panelling. Product Features
The numbering of the product features refers to the illustration of the machine on the graphics page. 1 Tacker head 2 Battery charge-control indicator 3 Handle 4 Socket for charge connector 5 Trigger 6 Magazine release button 7 Refill indicator
Bosch Power Tools 1 619 929 L03 | (16. Book Page 24 Friday, March 16, 2012 9:10 AM
24 | English 8 Plug connector for charger 9 Staple strip* 10 Magazine
*Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program. technical Data
Cordless tacker Article number Rated voltage Impact rate Fastener – Staple strip – Width – Length Magazine capacity , max. Weight according to EPTA-Procedure 01/2003 Battery Capacity Number of battery cells Battery Charger Article number – EU – UK Output voltage Charging current Allowable charging temperature range Charging period (battery discharged) Weight according to EPTA-Procedure 01/2003 Protection class PTK 3, 6 LI 3 603 J68 1. Book Page 25 Friday, March 16, 2012 9:10 AM
English | 25
Noise/Vibration Information
Measured sound values determined according to EN 60745. Typically the A-weighted sound pressure level of the product is 76 dB(A). The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. [. . . ] Fyrretræ) kan blive beskadiget, hvis de udsættes for alt for meget tryk. Book Page 110 Friday, March 16, 2012 9:10 AM
110 | Dansk
Vedligeholdelse og service
Vedligeholdelse og rengøring
Hold el-værktøjet rent for at arbejde sikkert og godt. Nedan använt begrepp ”Elverktyg” hänför sig till nätdrivna elverktyg (med nätsladd) och till batteridrivna elverktyg (sladdlösa). Book Page 120 Friday, March 16, 2012 9:10 AM
120 | Svenska Koppla från nätströmmen till laddaren om den inte ska användas under en längre tid. [. . . ]