[. . . ] -- Keep the mains cord, the base and the kettle away from hot surfaces. A serving tray), as this could cause water to accumulate under the appliance, resulting in a hazardous situation. -- Do not touch the body of the kettle during and some time after use, as it gets very hot. If the kettle has beenâ¯overfilled, boiling water may be ejected from the spout and cause scalding. [. . . ] This is perfectly normal and does not mean that the kettle has any defects. This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments. boil-dry protection This kettle is equipped with boil-dry protection. This device automatically switches off the kettle if it is accidentally switched on when there is no water or not enough water in it. Then wait for 30 seconds before youâ¯place the kettle back on its base toâ¯reset boil-dry protection. electromagnetic fields (EMF) This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly andâ¯according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. Before first use 1 Remove stickers, if any, from the base or the kettle. 3 To adjust the length of the cord, wind part of it round the reel in the
base. Pass the cord through one of the slots in the baseâ¯(Fig. 5 Fill the kettle with water up to the maximum level and let the water
boil once (see chapter âUsing the applianceâ). Using the appliance
6 Pour out the hot water and rinse the kettle once more. Tip: Use the cup indications on the appliance to boil the exact amount of waterâ¯you need. ¯By boiling 1 cup instead of 1 litre, you can save up to 66% of energy. You can fill the kettle either through the
spout or through the open lidâ¯(Fig. -- Fill the kettle at least to the one cup levelâ¯(250ml). Note: Make sure that the lid isâ¯closed properlyâ¯to prevent the kettle from boiling dry. 5 Push the on/off switch downwardsâ¯to switch on the applianceâ¯(Fig. The kettle switches off automatically (âclickâ) when the water boils. The power-on lightâ¯goes out automatically when the kettle switches off. [. . . ] 3 After theâ¯kettleâ¯switches off, add white vinegar (8% acetic acid) to the
MAX indication. Storage
1 To store the mains cord, wind it round the reel in theâ¯baseâ¯(Fig. Replacement If the kettle, the base or the mains cord of the appliance is damaged, take the base or the kettle to a service centre authorised by Philips for repair or replacement of the cord to avoid a hazard. You can purchase a new filter (order number 4222 459 45328) at your Philips dealer or at an authorised Philips serviceâ¯centre. [. . . ]