[. . . ] Book Page 7 Monday, June 25, 2012 4:15 PM English | 7 Hedge trimmer safety warnings Keep all parts of the body away from the cutter blade. Do not remove cut material nor hold material to be cut when blades are moving. Make sure the tool is switched off and unplugged when clearing jammed material. A moment of inattention while operating the hedge trimmer may result in serious personal injury. [. . . ] Never cut a hedge while people, especially children or pets, are nearby. The operator or user is responsible for accidents or hazards occurring to other people or their property. Do not operate the hedgecutter when barefoot or wearing open sandals, always wear substantial footwear and long trousers. The use of sturdy gloves, non-skid footwear and safety glasses is recommended. Do not wear loose clothing or jewellery which can be caught in moving parts. Thoroughly inspect the area where the hedgecutter is to be used and remove all wires and other foreign objects. bosch Power Tools Prior to operation , check cutter blades , blade bolts and cutter assembly for wear or damage. Before operation check the safe double locking function of the blade swivel mechanism. The blade can suddenly fold down, if unlocked and comes into contact with a branch. Never operate the hedgecutter with defective guards or without the guard in place. Always ensure all handles and guards supplied are fitted when using the hedgecutter. Never attempt to use an incomplete hedgecutter or one with an unauthorised modification. While operating the hedgecutter always be sure of a safe and secure operating position at all times, especially when using steps or a ladder. Always be aware of your surroundings and stay alert for possible hazards that you may not hear whilst operating the hedgecutter. Remove the plug from the socket: – before checking, clearing a blockage or working on the hedgecutter. € after striking a foreign object, inspect the hedgecutter for damage and make repairs as necessary. The hedgecutter should be stored in a dry, high or locked up place out of the reach of children. Do not attempt to repair the machine unless you are qualified to do so. [. . . ] 430 15 Mounting and Operation Action Delivery Scope Turn and fix blade in operating position Fitting the multi-tool attachmentt Set operating angle Working Advice Storage Figure 1 2 3 4 5 6 Please observe the article number on the type plate of your garden product. 25 see type plate on the garden product Declaration of Conformity We declare under our sole responsibility that the product described under “Technical data” is in conformity with the following standards or standardization documents: EN 60335 according to the provisions of the directives 2006/95/EC, 2004/108/EC, 2006/42/EC, 2000/14/EC. Troubleshooting Problem Motor runs but blades remain stationary Cutting blade hot Possible Cause Multitool-attachment not properly connected to power unit Cutting blade blunt Cutting blade has dents Too much friction, due to lack of lubricant Corrective Action Check for correct assembly Have blade sharpened Have blade inspected/overhauled Apply lubricant spray (1 609 200 399) F 016 L70 916 | (26. Com In all correspondence and spare parts orders, please always include the 10-digit article number given on the type plate of the garden product. [. . . ]