[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] Follow the instructions displayed on the screen to search for a suitable driver. ϸ ______________________________
Basic Operation
Note:
Please remove the Micro Vault properly following the procedure described in this manual. Precauções de transferência e remoção
Precauciones para la transferencia y la eliminación
Précautions pour le transfert et la suppression des données
Setup
When running Windows 7, Windows Vista, Windows XP (SP3 and higher)
Once the Micro Vault is connected to the computer, the drive icon for the Micro Vault device appears. ) You can now copy and save data on the Micro Vault by dragging files and folders on the drive icon, just as you would when copying data to a hard disk or to a floppy disk. 1 and higher
Once the Micro Vault is connected to the computer, the drive icon for the Micro Vault device appears. You can now copy and save data on the Micro Vault by dragging files and folders on the drive icon, just as you would when copying data to a hard disk or to a floppy disk. ƌ本手册中介绍的步骤正确删除MV随身存。否则不能正确录制数据。
Meanings of the Indicator Light
Indicator Light Status Off On
When the Micro Vault is in use, the indicator light indicates its status as follows. Meaning Standby Data transfer in progress (Do not remove the Micro Vault while the indicator light is flashing. )
™ ®
™ ®
Disconnection
Double-click (Safely Remove Hardware) in the task tray in the lower right portion of the screen. In the window that appears, select the name of the device that is to be removed, then click the Stop button. When the Stop a Hardware Device screen appears, make sure that the correct information is displayed, and then click the OK button. When the “Safe to Remove Hardware” message appears, you may remove the Micro Vault. (The icon and messages that appear may vary depending on the version of the OS. ) When running Windows Vista, you can also select “Safely Remove Hardware” by rightclicking the Micro Vault drive icon in Explorer or My Computer. When removing the Micro Vault while Virtual Expander is running, be sure to end the program first by right-clicking the Virtual Expander icon in the task tray and selecting “End” from the menu that appears. When running Windows 7, Windows Vista, Windows XP
• La couverture de garantie de ce produit se limite au support USB de stockage de données lui-même, lors d’une utilisation normale respectant les directives du présent mode d’emploi avec les accessoires inclus avec cet appareil et avec un des systèmes d’exploitation mentionnés ou recommandés. After confirming that the Micro Vault is in standby mode, disconnect the Micro Vault. Notes on Use
• Be careful when handling the device after extended periods of use as the surface may be hot. [. . . ] Microsoft, Windows, and Windows Vista are registered trademarks of Microsoft Corporation in the United States and other countries. Other system names and product names that appear in this manual are registered trademarks or trademarks of their respective owners. :USM4GM, USM8GM, USM16GM
™
®
• Our product warranty is limited only to the USB Flash Drive itself, when used normally in accordance with these operating instructions and with the accessories that were included with this unit in the specified or recommended system environment. [. . . ]