[. . . ] There is risk of electric shock.
8
ASSEMBLING AND PREPARING
Adjusting the stand height
ENGLISH ENG
1 Place the monitor mounted on the stand base
in an upright position.
Using the Kensington locking device
The connector for the Kensington lock is located on the rear of the monitor. For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www. kensington. com. Connect the monitor to the table with the Kensing-
2 Remove the tape attached at the bottom rear
of the stand body, then pull out the locking pin. Stand Body Tape Locking Pin
ton lock cable.
3 The height can be adjusted up to 110 mm.
110. 0mm
NOTE CAUTION
Once the pin is removed, it is not necessary yy to re-insert it to adjust the height. [. . . ] Avoid displaying a fixed image on the yy screen for a long period of time to prevent image burn. Use a screensaver if possible.
NOTE
"Self Image Setting" Function. yy This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. (Only supported in Analog Mode) ‘AUTO’ Function. yy When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. (Only supported in Analog Mode)
USING THE MONITOR SET
13
Peripheral device connection
Connect peripheral devices to the monitor.
NOTE
ENG ENGLISH
Two USB Downstream ports Connect these ports to a mouse, USB keyboard, memory stick with current spec under 100mA.
Peripheral devices are sold separately. yy The y y USB ports on the left and bottom of the monitor can be used to connect the keyboard, mouse, and other USB devices. Cables with angled plugs may have clearyy ance issues, use straight plugs when possible.
Angle Type
Straight Type
NOTE
Speakers may not work normally, depending yy on the server PC settings. Virtual solutions may affect the functions or yy speed of the specific USB storage device.
One USB Upstream port Connect this port to the downstream port of a computer, laptop or USB monitor (Your computer or USB monitor must support USB and have USB ports).
NOTE
The y y monitor's USB terminal supports USB 2. 0 and high speed cables.
14
CUSTOMIZING SETTINGS
CUSTOMIZING SETTINGS
ENGLISH ENG
1 Press the desired button on the bottom of the Monitor set. 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.
To return to the upper menu or set other menu items, use the up arrow ( ) button.
3 Select EXIT to leave the OSD menu.
Monitor set Buttons
Button Accesses the main menus. (See p. 15) OSD Locked/OSD Unlocked
Description This function allow you to lock the current control settings, so that they cannot be inadvertently changed. After that, user can select lock or unlock by pressing left/right button. If user selects the “Lock” icon by pressing the “OK” button, the message “OSD Locked” will appear. Use this function to set the power indicator on the bottom side of the monitor to On or Off. If you set Off, it will go off. If you set On at any time, the power indicator will automatically be turned on. The monitor set will switch to power off mode after the time to be chosen by user (1 ~ 24 hours)
20
CUSTOMIZING SETTINGS
READER Setting
ENGLISH ENG
1 Press READER button on the bottom of the Monitor
set to display the Reader Mode OSD.
2 Set the options by pressing the ◄ buttons.
Each option is explained below.
Reader Mode Reader 1 Reader 2 Reader Off Description It is a mode that the screen is adjusted to the best for the newspaper. If you want screen more bright, you can control brightness in Menu OSD. If you want screen more bright, you can control brightness in Menu OSD. It is a mode that reader mode is off.
NOTE
If option of Reader Mode is Reader 1 or Reader 2, Picture Mode will automatically be Custom and Super Energy Saving will automatically be Off.
CUSTOMIZING SETTINGS
21
SUPER ENERGY SAVING ENG ENGLISH
1 Press button on the bottom of the Monitor set to
display the SUPER ENERGY SAVING OSD.
2 Set the options by pressing the ► buttons.
Each option is explained below.
SUPER ENERGY SAVING High Low Off Description Enables SUPER ENERGY SAVING you can save energy with this energy- high efficient function. Enables SUPER ENERGY SAVING you can save energy with this energy- low efficient function. Disables SUPER ENERGY SAVING.
NOTE
TOTAL POWER REDUCTION: How much power is saved while using the monitor. yy SAVING DATA(W/h) yy 546 mm (21. 5 inch) SUPER SAVING (High) SUPER SAVING (Low) 4 W/h 2 W/h 604 mm (23. 8 inch) 4 W/h 2 W/h
Saving Data depends on the Panel. So, those values should be different from each panel and panel yy vendor. If option of Super Energy Saving is High or Low, monitor luminance become higher or lower depend on source. [. . . ] Digital 15 pin D-SUB Connector /DVI-D Connector (Digital) RGB Analog (0. 7 Vp-p/ 75 ohm), Digital D-SUB(Analog) : 1920 x 1080 @ 60 Hz DVI (Digital) : 1920 x 1080 @ 60 Hz VESA 1920 x 1080 @ 60 Hz
ENGLISH ENG
Attached ( ), Detached (O)
Product specifications shown above may be changed without prior notice due to upgrade of product functions. * The power consumption level can be different by operating condition and monitor setting. * The On mode power consumption is measured with ENERGY STAR® test standard. * ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.
SPECIFICATIONS
25
SPECIFICATIONS
24MB35PU
Display Screen Type Pixel Pitch Sync Input Horizontal Frequency Vertical Frequency Input Form Video Input Resolution Signal Input Input Form Max Recommend Plug & Play Power Consumption Power Input Speaker Wattage Dimensions (Width x Height x Depth) Weight Tilt Range Environmental conditions DDC 2B(Analog, Digital) On Mode : 23 W (ENERGY STAR® standard)* Sleep Mode ≤ 0. 3 W Off Mode ≤ 0. 3 W AC 100-240V ~ 50/60Hz 1. 2 A 1 W +1 W With Stand Without Stand 5. 1 kg -5° to 20° Operating Temperature 10°C to 35 °C Operating Humidity 10 % to 80 % Storage Temperature Storage Humidity Stand Base Power cord Wall-outlet type -20°C to 60 °C 5 % to 90 % non-Condensing 56. 9 cm x 43. 2 cm x 27. 1 cm 56. 9 cm x 34. 2 cm x 6. 3 cm 60. 4 cm (23. 8 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 60. 4 cm 0. 275 mm x 0. 275 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB, DVI-D) Separate Sync. [. . . ]