[. . . ] Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage. Set the "O-N" Switch to the "N" position for the applicable Kenwood disc changers/ CD players. [. . . ] Each time you press the knob, the audio pauses or plays.
⁄
• Disc 10 is displayed as "0". • The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected.
16 |
English
B64-3609-00_English_r5. indd Sec1:16
06. 12. 6 3:00:42 PM
Fast Forwarding and Reversing
Fast Forwarding Hold down toward [¢] with the Control knob. Release to resume the playback.
Function of disc changers with remote control
Direct Disc Search
Doing Disc Search by entering the disc number.
1 Enter the disc number
Press the number buttons on the remote control.
⁄
• There is no sound while the Audio file is being searched. • The accurate play time is not displayed during fast forwarding or reversing of the Audio file. • You cannot fast Forwarding and Reversing while AAC file is being played.
2 Do Disc Search Press the [+] or [–] button.
Cancelling Direct Disc Search Press the [38] button.
⁄
• Input "0" to select disc 10.
Track/File Search
Searching for a music on the disc or in the Audio file folder. Push the Control knob towards [4] or [¢].
Track/File/Disc/Folder Repeat
Replaying the music, disc in the Disc changer or Audio file folder you are listening to. Each time you press the button, the Repeat Play alternates between the modes shown in the tables below.
Function of disc changer/ Audio file
Disc Search/Folder Search
Selecting the disc set in the Disc changer or the folder recorded on the Audio file media. Push the Control knob towards up or down.
In CD & External disc source
Repeat play Track Repeat Disc Repeat (In Disc Changer) OFF Display "TRAC REP" "Disc REP" —
In Audio file source Function of remote control
Direct Music Search
Doing Music Search by entering the music number.
Repeat play File Repeat Folder Repeat OFF
Display "File REP" "FOLD REP" —
1 Enter the music number
Press the number buttons on the remote control.
⁄
• You can select Direct music Search up to 999.
2 Do music Search
Press the [4] or [¢] button.
Cancelling Direct Music Search Press the [38] button.
English |
17
B64-3609-00_English_r5. indd Sec1:17
06. 12. 6 3:00:43 PM
CD/Audio file/External disc control features
Scan Play
Playing the first part of each music on the disc or Audio file folder you are listening to and searching for the music you want to hear.
Function of Audio file
Folder Select
Quickly selecting the folder you want to hear.
1 Enter Folder Select mode
Press the [F. SEL] button. During Select mode the folder information is displayed as shown below.
1 Start Scan Play
Press the [SCAN] button. "TRAC SCN" (CD)/ "File SCN" (Audio file) is displayed.
2 Release it when the music you want to listen
to is played Press the [SCAN] button.
Random Play
Play all the music on the disc or Audio file folder in random order. When the Random mode is ON, "Disc RDM" (CD)/ "FOLD RDM" (Audio file) is displayed.
Folder name display Displays the current folder name.
2 Select the folder level
Push the Control knob towards up or down. When "ENTER" is displayed, "CODE" is also displayed.
4 Select the digits to enter
Push the Control knob towards right or left.
5 Select the Security Code numbers
Push the Control knob towards up or down.
3 Select the digits to enter
Push the Control knob towards right or left.
6 Repeat steps 4 and 5, and complete the
Security Code.
4 Select the Security Code numbers
Push the Control knob towards up or down.
7 Confirm the Security Code
Press the Control knob for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is also displayed.
5 Repeat steps 3 and 4, and complete the
Security Code.
6 Press the Control knob for at least 3 seconds.
"CLEAR" is displayed. The Security Code function deactivates.
8 Do the step 4 through 7 operation, and reenter
the Security Code. The Security Code function activates.
⁄
• If a wrong security code is entered, "ERROR" is displayed. Enter a correct security code.
⁄
• If you enter the wrong Code in steps 4 through 6, repeat from step 4.
In Standby mode
Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed
Touch Sensor Tone
Setting the operation check sound (beep sound) ON/OFF. Display "BEEP ON" "BEEP OFF" Setting Beep is heard. Now, you can use the unit.
English |
21
B64-3609-00_English_r5. indd Sec1:21
06. 12. 6 3:00:45 PM
Menu system
In Standby mode In Standby mode
Contrast Adjustment
Adjusting the display contrast. Display and Setting "CONT 1" "CONT 6" (Original setting) … …
Opening Demonstration
Setting the Demonstration when Power is turned ON. Display "Open ON" "Open OFF" Setting Demonstration is carried out when Power is turned ON. Demonstration is not carried out when Power is turned ON.
"CONT 11"
In Standby mode In Standby mode
Built-in Amp Setting
Controlling the built-in amplifier. Display "AMP ON" "AMP OFF" Setting The built-in amplifier activates. [. . . ] Before calling service, first check the following table for possible problems.
General
!
?
The Touch Sensor Tone doesn’t sound. ☞ The Touch Sensor Tone can’t be output from the preout jack.
Tuner source
?
!
Radio reception is poor. ☞ Connect the wire correctly, referring to the section on <Connecting Wires to Terminals>.
Disc source
!!
?
The specified disc does not play, but another one plays instead. [. . . ]