[. . . ] ¤
• If the power is not turned ON (or it is ON, but will be OFF immediately), the speaker wire may have a short-circuit or touched the chassis of the vehicle and the protection function may have been activated. If your car’s ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, as with battery wires, the battery may die. [. . . ] USB device (commercially available)
USB connector
Ignition key switch Car fuse box ACC Ignition wire (Red) Battery wire (Yellow) Car fuse box (Main fuse)
Wiring harness (Accessory 2)
Accessory @
FUSE ( 5A ) Ground wire (Black) - (To car chassis) Antenna Cord
The cable (Accessory 3) is fixed with a chassis using harness band (Accessory @). +
–
A
Accessory 4
Battery Connect to the vehicle's parking brake detection switch harness using the supplied relay connector. Parking sensor wire (Light Green)
PRK SW
Battery wire (Yellow) FUSE ( 10A ) Ground wire (Black) - (To car chassis)
A
For the sake of safety, be sure to connect the parking sensor. To vehicle's reverse lamp harness
Reverse sensor wire (Purple/White)
To car light control switch
Dimmer control wire (Orange/White) Steering remote control input (Light Blue/Yellow)
To steering remote Connect to the terminal that is grounded when either the telephone rings or during conversation. To connect the Kenwood navigation system, consult your navigation manual. Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna. When using the optional power amplifier, connect to its power control terminal. " terminal of the amplifier having the external amp control function. Mute wire (Brown)
Motor antenna control wire (Blue)
Power control wire (Blue/White)
External amplifier control wire (Pink/Black)
If no connections are made, do not let the cable come out from the tab. 1 5:26:20 PM
Receiver unit
Accessory @ Accessory 3 The cable (Accessory 3) is fixed with a chassis using harness band (Accessory @). receiver unit
FM/AM antenna input Wiring harness (Accessory 1)
REVERSE
FRONT L
White/Black White
+
ILLUMI
To front left speaker
FRONT R
REMO. CONT
Gray/Black Gray
+
To front right speaker
MUTE
REAR L
Green/Black Green
+
To rear left speaker
ANT CONT
REAR R
Purple/Black Purple
+
P. CONT
If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. 1 5:26:22 PM
System Connection
RELAY 2 RELAY 1
To Relay Box Accessory #
Receiver unit
■ Front Preout • Audio left output (White) • Audio right output (Red) ■ Rear Preout • Audio left output (White) • Audio right output (Red) ■ Subwoofer Preout • Audio left output (White) • Audio right output (Red) ■ Audio/Visual input 2 • Visual input (Yellow) • Audio left input (White) • Audio right input (Red) ■ Audio/Visual input 1 • Visual input (Yellow) • Audio left input (White) • Audio right input (Red) ■ Rear View Camera Input • Visual input (Yellow) ■ Audio/Visual Output • Visual output (Yellow) • Audio left output (White) • Audio right output (Red)
6 |
KVT-819DVD/KVT-839DVD
B54-4552-00_00_English. Monitor/Player unit
USB terminal (iPod) USB terminal
iPod
Receiver unit
Accessory 3
Connection cable (Included in the Disc changer)
Connection cable (Included in the Navigation System)
Disc Changer etc. 1 5:26:23 PM
Installation for Monitor/Player Unit
Firewall or metal support
Screw (M4X8) (commercially available)
Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw (commercially available) Metal mounting strap (commercially available) Accessory 5
Make sure that the unit is installed securely in place. [. . . ] Pull the unit all the way out with your hands, being careful not to drop it. (M5x7mm)
Screws (included in audio unit package) Screws (included in audio unit package)
Audio unit or others
⁄
• Do not use your own screws. 1 5:26:25 PM
Installation on Toyota Car using Brackets at Holes shown by "●"
or
When using the bracket shown above, you cannot use screws at two holes of the right and left unit sides. [. . . ]