[. . . ] • Do not install the speakers in unstable locations or locations subject to dust. • If the fuse blows, after checking to see if the wiring cord has shorted, be sure to replace with the stipulated size (amperage) fuse as displayed on the fuse box. (Using fuses other than the stipulated size can cause fires. ) Check the display!• To prevent a short circuit when replacing a fuse, disconnect the wiring harness at first. [. . . ] Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. For Turkey Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin Kontrolü Yönetmeliğe uygun olarak üretilmiştir. Eski Elektrik ve Elektronik Ekipmanların İmha Edilmesi Hakkında Bilgi (ayrı atık toplama sistemlerini kullanan ülkeleri için uygulanabilir) Sembollü (üzerinde çarpı işareti olan çöp kutusu) ürünler ev atıkları olarak atılamaz. Eski elektrik ve elektronik ekipmanlar, bu ürünleri ve ürün atıklarını geri dönüştürebilecek bir tesiste değerlendirilmelidir. Yaşadığınız bölgeye en yakın geri dönüşüm tesisinin yerini öğrenmek için yerel makamlara müracaat edin. Uygun geri dönüşüm ve atık imha yöntemi sağlığımız ve çevremiz üzerindeki zararlı etkileri önlerken kaynakların korunmasına da yardımcı olacaktır.
ENGLISH
2
B61-1376_1_EN_00_KSC-W1200T. indd 2
12. 11. 30 10:32:51 AM
Parts included
No. Part Name Outside Shape Quantity 4 4 2 Remote control 1 (5 m / 16 ft) 10-pin connector cord 2 (5 m / 16 ft) Speaker cord 3 (4. 3 m/ 14 ft) 4 Fixture A 5 Fixture B Tapping screw 6 (ø 5 × 16 mm) Machine screw 7 (M4 × 5 mm) Machine screw 8 (M3 × 8 mm) Hook-and-loop fastener 9 (Double-side adhesive/ for Remote control)
1
Connection
Caution: Before wiring, be sure to remove the wire from the negative terminal of the battery. After checking, connect the wire from the negative terminal of the battery.
■ Terminals of Subwoofer
POWER/SPEAKER INPUT terminal REMOTE terminal
ENGLISH
■ Connecting the remote control unit
1 Remote control Connect with the lock part of remote control jack facing down. Lock part
Lights in blue.
When the power turns ON, the illumination lights.
Notes: • Be sure to connect the supplied remote control unit. • If the cord is not connected properly, the illumination on the remote control unit do not light up. • Do not insert the remote control connector upside down or forcibly. Fix the cord so that it will not protrude from the side of the speaker unit. p
1 Remote control 2 10-pin connector cord
■ Fixing the subwoofer
The subwoofer can be fixed in two ways. Select the optimum attaching position of fixture A 4 according to the subwoofer installation location.
Fixing method A
Fixing method B
4 Fixture A
ENGLISH
1
4 Fixture A 7 Machine screw x 4 4 Fixture A x 2
1
7 Machine screw x 4 4 Fixture A x 2
Caution: This por tion becomes slightly hotter than other portions because it functions as the radiator of the heat generated by the amplifier. Attach the fixtures A 4 to the speaker unit securely using the machine screws 7. Be careful so that the connected cords do not get in between the speaker unit and fixtures A 4. 2
6 Tapping screw x 4
Caution: This por tion becomes slightly hotter than other portions because it functions as the radiator of the heat generated by the amplifier. Attach the fixtures A 4 to the speaker unit securely using the machine screws 7. Be careful so that the connected cords do not get in between the speaker unit and fixtures A 4. 2
6 Tapping screw x 4
Drill four pilot holes for ø 3. 6 mm screws.
Drill four pilot holes for ø 3. 6 mm screws.
Drill the pilot holes for ø 3. 6 mm screws on the sheet metal section of the vehicle , and attach the speaker unit to the vehicle using the tapping screws 6.
Drill the pilot holes for ø 3. 6 mm screws on the sheet metal section of the vehicle , and attach the speaker unit to the vehicle using the tapping screws 6.
6
English
B61-1376_1_EN_00_KSC-W1200T. indd 6
12. 11. 30 10:33:00 AM
■ Installing the remote control unit
Install the remote control unit on the vehicle by the provided hook-and-loop fastener.
1 Remote control (Rear panel) Vehicle
Caution: Install the remote control unit in a position that does not come in the way of driving operations. Avoid installing it in a place subject to direct sunlight or direct hot wind from the heater. Remove dirt from the installation position before attaching the hook-and-loop fastener.
9 Hook-and-loop fastener (Harder surface)
9 Hook-and-loop fastener (Softer surface)
Fuse exchange g
Exchange with the specified capacity fuse.
Caution: Be sure to replace with same capacity (amperage) as displayed on the fuse. [. . . ] • Turn the VOLUME control knob and set the input level to an optimum level. • Turn the VOLUME control knob and set the input level to an optimum level. • Connect the cords correctly by referring to the connection example (on page 4, 5). • Attach the grounding terminal to the metallic section of the vehicle (not a coated surface) by tightly screwing it. [. . . ]