[. . . ] HD7854
User manual
1
ENGLISH 6 DANSK 30 DEUTSCH 54 FRANÇAIS 81 MAGYAR 107 NEDERLANDS 132 NORSK 159 SVENSKA 184
HD7854
6
ENGLISH
Introduction Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. This unique system combines the easy-to-use Philips SENSEO® coffee machine with the specially developed Douwe Egberts SENSEO® coffee pods, giving you a full, smooth coffee with a delicious foam layer. The SENSEO® Latte Select coffee machine offers you delicious coffee specialties made with fresh frothed milk. [. . . ] Note: Make sure that you push the milk tube far enough onto the connector so that the holes in the connector are covered. If you do not push the milk tube far enough onto the connector, you get less milk froth. 7 Fasten the milk container lid onto the milk container (‘click’). Note: Make sure that all parts of the milk container lid are dry before you reassemble the lid. 8 Slide the milk container unit into the coffee machine (1) and push down the milk container lever (‘click’) (2). 4 Remove the coffee spout cover and take the coffee spout out of the machine. 5 Clean the coffee spout cover, the coffee spout, the coffee collector and the drip tray in hot water, if necessary with some washing-up liquid, or in the dishwasher. 7 Clean the pod holders in hot water, if necessary with some washingup liquid, or in the dishwasher. If the sieve in the centre of the pod holder is clogged, rinse the pod holder under a running tap. ENGLISH
8 Clean the water reservoir in hot water, if necessary with some washing-up liquid. Note: If you use a washing-up brush, be careful not to damage the valve and float in the bottom of the water reservoir. 10 Rinse the parts with fresh water after cleaning and put them back into the machine. Note: Be careful not to damage the metal tab on the water distribution disc. Flush the machine in the following way: 1 Fill the water reservoir with cold water up to the MAX indication and put it back onto the machine. 2 Put the 1-cup pod holder q or the 2-cup pod holder qq in the machine without pod or pods. , , The light rings around the 1-cup button q and the 2-cup button qq light up continuously. 6 To start flushing, press the 1-cup button q and the 2-cup button qq briefly at the same time. , , During the flushing cycle, the water in the water reservoir is flushed through the machine and the boiler is filled with fresh water. If you do, the boiler does not fill itself properly with fresh water. Note: During the flushing cycle, the machine produces more noise than during a regular brewing cycle. , , The machine switches off automatically when the flushing cycle ends. ENGLISH
Descaling When to descale
23
-- Descale the SENSEO® coffee machine as described below when the CALC CLEAN indicator goes on. [. . . ] The CALC CLEAN indicator goes on when you need to descale the machine. This happens after 1000 cups of SENSEO® black coffee or 250 cups of cappuccino, latte macchiato or caffè latte have been brewed. To descale your SENSEO® machine, follow the instructions in chapter ‘Descaling’. The CALC CLEAN indicator only goes out after the descaling procedure has been performed correctly and the Calc-Clean tool has been removed. [. . . ]