[. . . ] CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service centre. [. . . ] LED State Off On Blink (Twice per second) Blink (Once per second) On -> Off (After 3 seconds) Stand by Booting Mute LED Color Red Orange Power on or disconnected power cord Bluetooth ready Bluetooth paired Optical function selected Green
NB5630A-NS. DDEULLK_ENG. indd 9
2013-10-23
9:14:44
10
Getting Started
Rear panel
1
Getting Started B + / - (Volume) Adjusts speaker volume. D Shaft E Optical input F DC input
NB5630A-NS. DDEULLK_ENG. indd 10
A
B
C
D E F
A F (Function) Press it repeatedly to select other function.
Precautions in using the touch buttons yy Use the touch buttons with clean and dry hands. - In a humid environment, wipe out any moisture on the touch buttons before using. - If you apply too much strength, it can damage the sensor of the touch buttons. yy Touch the button that you want to work in order to operate the function correctly. yy Be careful not to have any conductive material such as metallic object on the touch buttons. It can cause malfunctions.
Caution >>
2013-10-23
9:14:44
Getting Started
11
Mounting the main unit on a wall
Mounting the main unit on a wall, you should connect all the cables for operating the unit. For details, refer to the page 13.
SCREEN
1
Getting Started
2. When you mount it on a wall (concrete), use the wall plugs. Use the sheet to check the point to drill.
You can mount the main unit on a wall. Prepare screws and brackets.
Main unit
Screw (8) & Wall Plug (8)
Wall bracket (3)
WALL BRACKET INSTALL GUIDE (3)
yy The set may be damaged if the set falls down on its side. 1. Fitted with Bracket Center Guide according to Screen Center and Bottom Line.
Caution >>
Make sure that the triangle mark on the wall bracket should be facing upwards. yy After the unit is turned on by AUTO POWER function, it will be automatically turned off if there is no signal for a certain period of time from the TV connected by LG Sound Sync (Optical). yy After the unit is turned on by AUTO POWER function, it will be automatically turned off if there is no signal for a certain period of time from the external device connected by an optical cable. yy It is not available to turn on the unit by AUTO POWER function if you turn off the unit directly. yy On bluetooth function, this unit may be turned on by AUTO POWER function depending on the connected bluetooth device. But in this case, this unit will be turned off automatically.
Using Bluetooth technology
About Bluetooth
Bluetooth is wireless communication technology for short range connection. The sound may be interrupted when there is interference by the other electronic waves which run on same frequency or if you connect bluetooth devices in the other rooms nearby. Connecting individual devices under Bluetooth® wireless technology does not incur any charges. A mobile phone with Bluetooth® wireless technology can be operated via the Cascade if the connection was made via Bluetooth® wireless technology. Available Devices : Mobile phone, MP3, Laptop, PDA etc.
Note , ,
3
Operating
Bluetooth profiles
In order to use Bluetooth® wireless technology, devices must be able to interpret certain profiles. A2DP (Advanced Audio Distribution Profile)
NB5630A-NS. DDEULLK_ENG. indd 16
2013-10-23
9:14:49
Operating
17
Listening to music stored on the Bluetooth devices
Pairing this unit and Bluetooth device
Before you start the pairing procedure, make sure the Bluetooth feature is turned on in to your Bluetooth device. Once a pairing operation is performed, it does not need to be performed again. [. . . ] To play a music stored on your Bluetooth device, refer to your Bluetooth device’s user guide.
Note , ,
NB5630A-NS. DDEULLK_ENG. indd 17
2013-10-23
9:14:49
18
Operating
Other operations
Turn off the sound temporarily
You can mute your unit, for example, to answer the telephone. To cancel it, press again on the remote control or change the volume level.
3D Sound effect
3D Sound features deliver sound creating a wider spot so you can enjoy more immersive and cinematic surround sound. Turn on or off 3D Sound effect by using 3D SOUND ON/OFF on the remote control.
DRC (Dynamic range control)
Make the sound clear when you feel the volume is too low. Turn on or off DRC by using DRC ON/OFF on the remote control.
3
Operating
Adjust the woofer level settings
You can adjust the sound level of the wireless subwoofer. [. . . ]