[. . . ] Contact with the service center for repair.
Precautions in Using the Product
WARNING
Do not disassemble, repair or modify the product at your own discretion.
- Fire or electric shock accident can occur. - Contact the service center for check, calibration or repair.
Keep the product away from direct sunlight.
- The product can be damaged.
Do not place the product in a built-in installation such as bookcase or rack.
- Ventilation required.
Electrical Power Related Precautions
WARNING
Make sure to connect the power cable to the grounded current.
- You may be electrocuted or injured.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Do not touch the power plug with wet hands. Additionally, it the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.
- You may be electrocuted due to excess moisture.
Refer all servicing to qualified service personnel. [. . . ] SERVICE ONLY PORT
9 2
10 3
DIGITAL AUDIO OUT OPTICAL (Except for 19/22LS4D*) Connect digital audio from various types of equipment. Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an external device to these jacks. RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC.
1 1
4
5
12
6
13
7
6
STAND INSTALLATION
ENGLISH
(LCD TV Models: 32/37/42LG20**, 26/32/37/42LG30**, 32/37/42LG5***)
A
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation. ) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
1
3
Assemble the TV as shown.
2
Assemble the parts of the S t a n d B o d y with the C o v e r B a s e of the TV.
4
Fix the 4 bolts securely using the holes in the back of the TV.
Stand Body
Cover Base
(Only 19/22LG30**)
Stand Body
Cover Base
1 2 3
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the parts of the S T A N D B O D Y with C O V E R B A S E of the TV. Insert the S T A N D B O D Y into a C O V E R B A S E until clicking sound. Assemble the TV as shown.
7
PREPARATION
STAND INSTALLATION
ENGLISH
DETACHING STAND
(Only 19/22LS4D*)
(Only 19/22LS4D*)
Image shown may differ from your TV. Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
1
1
Place the tv with its front facing downward on a cushion or soft cloth.
2 2
Hold the H i n g e B o d y and bend it upward.
Hinge Body
Pull the C o v e r B a s e backward during pressing a button on the S t a n d B o d y.
3 3
Insert the S t a n d B o d y into the TV until clicking sound.
Hold the C o v e r B a s e and pull with shake it backward to separate from the S t a n d B o d y.
4
Stand Body
Hold the S t a n d B o d y and bend it upward.
4
Assemble the parts of the S t a n d B o d y with the C o v e r B a s e of the TV.
5
Pull stand body to separate from the TV during pressing 2 latches.
Cover Base
8
BACK COVER FOR WIRE ARRANGEMENT
ENGLISH
LCD TV Models: 32/37/42LG20**, 26/32/37/ 42LG30**, 32/37/42/47/52LG5***
LCD TV Models : 19/22LS4D*, 19/22LG30**
1
Connect the cables as necessary. To connect additional equipment, see the External Equipment Setup section of the manual. Open the C A B L E M A N A G E M E N T C L I P as shown and manage the cables.
1
Connect the cables as necessary. NOTE
G
G G G G G
If you do not finish the set-up Installation Guide by pressing RETURN or if you time out on the OSD (On Screen Display) the installation menu will continuously appear until the set up is completed whenever the TV is switched on If you select the wrong local country, teletext may not appear correctly on the screen and some problems may occur during teletext operation. The CI (Common Interface) function may not be applied based on country broadcasting circumstances. DTV mode control buttons may not function based on country broadcasting circumstances. In country that Digital broadcasting regulation isn't fixed, some DTV function may not work depending on digital broadcasting circumstances. The Country Setting "UK" should only be activated UK.
14
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. SETUP
Move OK
ENGLISH
Auto tuning Manual tuning Programme Edit Booster : On Software Update : Off Diagnostics CI Information
PICTURE
Aspect Ratio Picture Mode : 16:9 : Vivid · Backlight · Contrast · Brightness · Sharpness · Colour · Tint
E
Move
OK
100 100 50 70 70 0
R
G
AUDIO
Auto Volume Balance Sound Mode : Off 0 : Standard · 120Hz · 200Hz · 500Hz · 1. 2KHz · 3KHz
E
Move
OK
L
R
SETUP
PICTURE
AUDIO
TIME
OPTION
LOCK
0 0 0 0 0
-
+ + + + +
TIME
Clock Off Time On Time Sleep Timer Auto Sleep Time Zone
Move
OK
OPTION
Menu Language Audio Language Subtitle Language Hard of Hearing( Country Input Label SIMPLINK Key Lock
E
Move
OK
LOCK
Move
OK
: Off : Off : Off : Off : Canary GMT
: English : English : English ) Off :UK : Off : Off
Lock System : Off Set Password Block Programme Parental Guidance : Off
1MENU 2
OK
Display each menu.
Select a menu item.
3
OK
Move to the pop up menu. · Press the RETURN button to move to the previous menu screen.
15
WATCHING TV /PROGRAMME CONTROL
AUTO PROGRAMME TUNING
Use this to automatically find and store all available programmes. When you start auto programming in digital mode, all previously stored service information will be deleted.
16
ENGLISH
SETUP
Move
OK
SETUP
Move
OK
Auto tuning Auto tuning Manual tuning Programme Edit Booster : On Software Update : Off Diagnostics CI Information
Auto tuning Auto tuning Manual tuning Programme Edit Booster : On Software Update : Off Diagnostics CI Information
All service-information will be updated. Yes
SECAM L Search
No
1MENU 2
OK
Select SETUP.
· Use NUMBER buttons to input a 4-digit
password in Lock System `On'.
· If you wish to keep on auto tuning select YES
Select Auto Tuning.
using the button. Otherwise select NO.
3
OK
Select Yes.
4
OK
Run Auto tuning.
· Press the MENU button to return to normal TV viewing. · Press the RETURN button to move to the previous menu screen.
APPENDIX
MAINTENANCE
ENGLISH
Early malfunctions can be prevented. [. . . ] A Test the mains outlet by plugging another TV into the same outlet.
A A A
Picture appears slowly after switching on
This is normal, the image is muted during the TV startup process. Please contact your service centre, if the picture has not appeared after five minutes.
No or poor colour or poor picture
Adjust Colour in menu option. A Activate any function to restore the brightness of the picture.
A A A
Horizontal/vertical bars or picture shaking Poor reception on some channels Lines or streaks in pictures No picture when connecting HDMI
Check for local interference such as an electrical appliance or power tool.
Station or cable channel experiencing problems, tune to another station. Station signal is weak, reposition the antenna to receive weaker stations. [. . . ]