[. . . ] For optimum performance and safety, please read these instructions carefully. Fm Page 2 Friday, April 18, 2014 9:46 AM
These operating instructions are applicable for models SC-HC29 and SC-HC19. Unless otherwise indicated, illustrations in these operating instructions are of SC-HC29. Unit • To reduce the risk of fire, electric shock or product damage, – Do not expose this unit to rain, moisture, dripping or splashing. [. . . ] Some CD-R/RW cannot be played because of the condition of the recording. 1-ALBUM RANDOM
1 RND
REPEAT OFF REPEAT ON REPEAT
█ Note on USB device
• This system does not guarantee connection with all USB devices. Note: • During random playback, you cannot skip to tracks which have been played. Note on MP3 file
Link mode
BLUETOOTH
You can change the link mode to suit the connection type. preparation If this system is connected to a Bluetooth® device , disconnect it (Z“Disconnecting a device”). Tracks will not necessarily be played in the order you recorded them. MP3 file on disc • This system can access up to: – 255 albums (including root folder) – 999 tracks – 20 sessions • Disc must conform to ISO9660 level 1 or 2 (except for extended formats). mP3 file on USB device • This system can access up to: – 800 albums (including root folder) – 8000 tracks – 999 tracks in one album
1 2
Press [PLAY MENU] repeatedly to select “LINK MODE”. To tune automatically, press and hold the button until the frequency starts changing quickly. To memorise the setting Continue with step 4 of “Manual presetting”. Checking the signal status
Press [PLAY MENU] repeatedly to select “FM STATUS” and then press [OK]. FM MONO
RDS broadcasting
This system can show the text data transmitted by the radio data system (RDS) available in some areas. The tuner presets all the stations it can receive into the channels in ascending order. PS PTY FREQ Programme service Programme type Frequency
LOWEST CURRENT
Note: RDS may not be available if the reception is poor. The new station replaces any station that occupies the same preset number. Play timer
(Except for Bluetooth® source) You can set the timer to come on at a certain time to wake you up. To check the time Press [SETUP] repeatedly to select “CLOCK” and then press [OK]. Press [R, T] to select the source you want to play and then press [OK]. Sleep timer
The sleep timer switches off the system after the set time. To check the setting Press [SETUP] repeatedly to select “TIMER ADJ” and then press [OK]. Note: • The timer starts at a low volume and increases gradually to the preset level. If you switch off the system and then switch on again while a timer is in operation, the timer will not stop at the end time. [. . . ] 1 2
MPEG-1 Layer 3, MPEG-2 Layer 3 Power consumption in standby mode is measured with USB device disconnected from the unit before switching to standby mode. Fm Page 16 Friday, April 18, 2014 9:46 AM
Attaching the unit to a wall (optional)
You can use the supplied wall mount brackets to attach this unit to the wall. Panasonic cannot be held responsible for any property damage and/or serious injury, including death resulting from improper installation or incorrect handling. The installation should be done by a competent installation specialist. [. . . ]