[. . . ] Operating Instructions
N
1 4 7
C
2 5 8 0
3 6 9
Wide LCD TV
Model No.
TX-22LX2
The illustration shown is an image.
Please read these instructions before operating your set and retain them for future reference.
English
TQBC0856
Welcome
Dear Panasonic Customer, We hope that you have many years of enjoyment from your new TV. The Quick Start Guide section at the beginning of this instruction book will allow you to use the TV as quickly as possible. We recommend that you then read the complete instruction book, and keep it to refer to as you explore the range of advanced features that this LCD TV offers.
Contents
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Quick Start Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The box at the bottom of the screen shows the character currently selected. CH44 CH51 CH41 CH47 CH37 Name XYZ FTP 123 456 Lock Off Off Off Off Off
ABCDEFGHIJKLMNOPQRST UVWXYZ+-. 0123456789
Locking a programme channel
You may wish to lock a programme channel to prevent access to it. Note: When a programme position is locked, Direct Channel Access using the C and numeric buttons on the remote control is not available.
OK
Programme edit
Prog. CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 Lock Off Off Off Off Off
Copying programme information to a recording device
You can copy programme information to a compatible recording device connected to AV1 / AV2. This might take a few seconds, depending on the number of stations stored. If the message “Feature not available” appears on the screen, the television is unable to send the programme information to the recording device(s). See the device’s instruction book for further information.
Blue
DOWNLOAD IN PROGRESS PLEASE WAIT Programme : 63 Remote control unavailable
15
Tuning menu – Auto setup
Auto setup automatically retunes your TV. This feature is useful if, e. g. , you move house and wish to retune your TV to receive the local stations.
MENU
Press the MENU button. Access Setup menu.
N
OK
Move to choose Tuning menu.
1 2 5 8 0 3 6 9
Access Tuning menu. Notes: • If you proceed with the next step all tuning data will be erased (all stations and their programme positions stored in your TV’s memory will be wiped out so the new settings can be stored). • If you exit the procedure after this point and before Auto setup is complete, no station information will be stored. Restart and complete the Auto setup procedure so that the TV is retuned. The TV will search for, locate, store and then sort into order your local stations. If compatible recording device is connected via the AV1 / AV2 terminal, programme data will be sent to the device via Q-Link. Once this operation is completed the TV will display the programme now stored on programme position 1.
4 7
C
TV
OK
WARNING
All current tuning data will be erased
Start Auto Setup Exit
Return
CH44
AUTO SETUP IN PROGRESS SEARCHING : PLEASE WAIT Stored 21 MENU EXIT : Return : To exit CH44 68
16
Tuning menu – Manual tuning
It is possible to retune individual programme positions: Press the MENU button. Press the EXIT button at any time to go back to watching TV.
OK
1
TV
MENU
OK
N
1 4 7
C
2 5 8 0
3 6 9
CH44
EXIT
Manual tuning 21
Search down/up Return Programme down/up
Store Exit
68
Note: If your VCR is connected to this TV by an RF cable only, choose programme position “0” to tune to the VCR signals.
Manual tuning (via top panel)
It is also possible to use the control panel buttons on the top of your TV to tune individual programme positions: Press the F button until Tuning mode is reached. Press the –/ or +/ button to access Tuning mode.
Press the TV/AV button to move between Change programme and Search. Press the –/ or +/ button to change programme position or start search. Press the F button at any time to go back to watching TV.
STR F TV/AV
CH44
1
Manual tuning -, + TV / AV STR F 21
STR F
: : : :
Search Move cursor To store To exit 68
-/ +/ TV / AV
17
Shipping condition
Shipping condition allows you to reset the TV to its original condition, i. e. , no channels tuned in. This is useful, for example, if you move to a different area when you will probably want the TV to tune itself to your new local stations. This can be done either through the Shipping condition menu or through the Auto setup menu.
The Shipping condition menu will reset all data, clearing all analogue tuning information and resetting all control levels back to factory settings. [. . . ] • For Scart terminal wiring information see page 30.
28
Troubleshooting
If there is a problem with your TV please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model number and serial number (both found on the rear of the TV). Symptoms Picture Sound
Checks
Aerial location, direction or connection Snowy Picture Noisy Sound
Aerial location, direction or connection Multiple Images Normal Sound Electrical appliances Cars / Motorcycles Fluorescent lights Interference Noisy Sound Switch on P-NR in Picture menu to reduce picture noise. Check if in Standby mode.
No Picture
No Sound
Colour controls set at minimum levels. [. . . ]