[. . . ] VIDEO SENDER DOMESTIC VIDEO/AUDIO MICROWAVE LINK The VIDEO LINK transmit / receive system provides a wireless connection between the main source of Audio and Video equipment to another Audio and Video equipment. [. . . ] connect one side of the SCART connector accessory Connect the other side of the SCART connector accessory to the source equipment. Connect the RCA (Red/white/yellow) lead of the SCART connector to the RCA input connectors on the Transmitter video link. Run this lead so that the emitter can transmit to the sensor in the source equipment or be able to reach all equipment’s to be controlled. Study the equipment that you are trying to control to locate the equipment’s sensor. When the operation has been proved the emitter can be secured with the self-adhesive pad. Arrange the Plate aerial and the rod aerial upright and the flat surface pointing towards the receiver. INSTALLATION CONNECTING THE RECEIVER • Connect an RCA-SCART lead from the receiver to the second TV. As shown below: Picture 2: • • Arrange the Plate aerial and the rod aerial upright and the flat surface pointing towards the receiver. The installation is now complete. TESTING THE SYSTEM • • • • • • • With the power connected press the standby button on each unit to switch them on. [. . . ] 433MHz CE certified SCART connector accessory for simple connection. RECEIVER ◊ ◊ ◊ ◊ ◊ ◊ ◊ ◊ Compatible 2. 45 GHz receiver for the above transmitter Directional aerial FM stereo sound Multi-channel : CH1: 2. 410GHz/ CH2: 2. 431GHz/ CH3: 2. 452GHz, CH4: 2. 473GHz On/off with indicator Size W 121 x D 125 x H 39 MM Infra red link in the IR version CE certified [. . . ]