[. . . ] For details about how to use the system, refer to the Userâs Guide (page 13). Please read this document before using the unit and save it for future reference. A A Accessory item/Part number AC adaptor/PNLV2360Z Quantity 1
Other information
R Design and specifications are subject to change without notice. R The illustrations in these instructions may vary slightly from the actual product. [. . . ] 5 m
Using the app
When you register the camera by using the [Home Network] app, you can assign a name to your devices and group them by location. Information about sensor features
The camera has 3 sensor features: a visual sensor used for motion detection, a temperature sensor, and a sound sensor. Please read the following information about each sensor before deciding where to install the camera. Note: R The cameraâs sensor features are not designed to be used in situations that require high reliability. R Panasonic takes no responsibility for any injury or damage caused by the use of the cameraâs sensor features. 4 feet) Note: R Movement may be incorrectly detected when the moving object and the background have similar colors. R Movement may be incorrectly detected when there are sudden changes to the overall brightness level, such as when lights are turned on. Com/support
Setup
Direction of motion
It is easier to detect objects that move sideways in front of the camera, and more difficult to detect objects that move directly toward the front of the camera. Sound sensor
The sensor is triggered when the set sound level is exceeded. Note: R The sound sensor does not function while the cameraâs lullaby feature is playing a lullaby. R The sound sensor may not function as desired when the camera is placed in noisy environments. A
B C
Confirming the usage area
Wireless communication range
The wireless communication range of each device in the system from the hub is approximately 50 m (160 feet) indoors and approximately 300 m (1, 000 feet) outdoors. Wireless communication may be unreliable when the following obstacles are located between the hub and other devices. R Metal doors or screens R Walls containing aluminum-sheet insulation R Walls made of concrete or corrugated iron R Double-pane glass windows R Multiple walls R When using each device on separate floors or in different buildings Note: R The cameraâs LED indicator blinks quickly in red if it is out of range of the hub. D E
It is difficult to detect movement directly towards the front of the camera. R Do not mount the camera on the following places: plaster board, ALC (autoclaved lightweight cellular concrete), concrete block, plywood less than 25 mm (1 inch) thick, and etc. 1 Screws 2 28 mm (1 3/32 inches)
2
1
3
Adjust the angle of the camera. 3 mm (1/32 inches)
1
2
Note: R Use the following template when determining the location of the screw holes. Com/support
11
Appendix
Testing the motion detection range
After you have installed the [Home Network] app on your mobile device, you can use your mobile device to test the performance of the cameraâs motion detection feature. Features available when using the [Home Network] app
Some of the features that are available when using the [Home Network] app are listed below. Â Security system You can use the app to arm and disarm the security system, confirm the current status of the sensor, and view a log of previous security events. Â Live camera monitoring You can view live images from the camera, even while away from home. [. . . ] During the âPartsâ Limited Warranty period, there will be no charge for parts. You must mail-in your product prepaid during the Limited Warranty period. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. [. . . ]