[. . . ] It also provides moisturizing effect on the skin or hair and reduces the smell in the room and constrains propagations of mold and bacteria. Operation conditions
Use this air conditioner under the following temperature range. Indoor DBT 32 16 30 16 10 16 WBT 23 11 DBT 43 -10 24 -30 -30 Outdoor WBT 26 18 -
2
Quick guide
1 3
Table of contents Inserting the batteries
1 Open the back cover of remote control 2 Insert AA batteries (can be used ~ 1 year) 3 Close the cover
Safety precautions . 15
OFF
CANCEL
1
CLOCK
RESET
MENU
Accessories
• AA batteries × 2
Basic operation
1 Select the desired mode • Press AUTO, COOL, DRY or HEAT button to start the operation. [. . . ] For R32 and R410A, the same flare nut on the outdoor unit side and pipe can be used. Models that use refrigerant R32 and R410A have a different charging port thread diameter to prevent erroneous charging with refrigerant R22 and for safety. Also, when storing the piping, securely seal the opening by pinching, taping, etc. This appliance shall be stored in a room without continuously operating open flames and ignition sources. This appliance shall be stored so as to prevent mechanical damage from occurring. 6
After a long period of use, make sure the installation rack does not deteriorate to prevent the unit from falling down. To prevent malfunction or damage of the remote control: • Remove the batteries if the unit is not going to be used for a long period of time. New batteries of the same type must be inserted following the polarity stated. Power supply
Do not disconnect the plug by pulling the cord to prevent electric shock. 7
Safety precautions
English
How to use
(Green) (Orange) (Green) (Blue) (Green)
Indicator
To select operation mode
AUTO
For your convenience
POWER TIMER +8/10°C nanoe/ODOR CLEANUP
• During operation mode selection the POWER indicator blinks. Unit selects operation mode every 30 minutes according to temperature setting, operation mode, outdoor and room temperature. • In COOL/DRY mode , if AUTO is set , the louvers swings left/ right and up/down automatically. In HEAT mode, if AUTO is set, the horizontal louver is fixed at the predetermined position. The room temperature should be less than 18°C and the outdoor temperature should be less than 10°C and previous operation is heating. Recommending OFF this function when heating is not operated for a long time. 5 1 2 3 5 7 9hr Cancel
SLEEP
Each options confirmed by the repeating of process from 1 through 3 above. This operation provides you with a comfortable environment while sleeping by gradually decrease and/or increase the set temperature within 1°C for avoiding the room from unnecessary cooling and/or heating. When used together with the daily timer, sleep operation has a priority. 11
How to use
* Stops operation combined with AUTO COMFORT function after human sensor not detecting for 3 hours or more. English
• This operation release odor from the internal indoor unit. The operation activates for 20 minutes, and resume to the presetting operation automatically. OFF timer: ODOR CLEANUP continuous display and the operation stopped after odor removal end. [. . . ] Remove air filter
1 Raise Close it securely Attach air filter
Rail (Orange) Ditch
Arm
1 Insert at both sides 2 Close down For seasonal inspection after extended non-use • Checking of remote control batteries. After 15 minutes of operation, it is normal to have the following temperature difference between air inlet and air outlet vents:
COOL: ≥ 8°C Air Purification Filter HEAT: ≥ 14°C
Air Purification Filter
• Do not wash/rinse the filter with water. : CZ-SA33P
For extended non-use • Activate HEAT mode for 2~3 hours to remove moisture left in the internal parts thoroughly to prevent mould growth. / Cleaning instructions
Pressing ECONAVI button for 5 seconds, and display shows “OPEN LOUVER”, the louvers will be open. [. . . ]