[. . . ] Note: Follow the on screen instructions for operating the related features. Ensure that no open flame sources, such as lit candles, are placed on top of the TV. To prevent injuries, this TV must be securely attached to a wall by carefully following the instructions (if the option is available). Occasionally, a few non-active pixels may appear on the screen as a fixed blue, green or red point. [. . . ] (*) LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel number sequence (if available). Note: Do not turn off the TV while initializing first time installation. Note that, some options may not be available depending on the country selection. To Switch the TV Off
Press the Standby button on the remote control or press the Standby button on the TV, then the TV switches into standby mode. To power down the TV completely, unplug the power cord from the mains socket. Note: When the TV is switched into standby mode, the standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active. First Time Installation When turned on for the first time, the language selection screen is displayed. On the next screen, set your preferences using the directional buttons. Note: Depending on the Country selection you may be asked to set and confirm a PIN at this point. You have to enter it if you are asked to enter a PIN for any menu operation later. 5” inch (hdd with external power supply) external hard disk drives or USB memory stick to your TV by using the USB inputs of the TV. This feature can also be enabled or disabled under the Setup>More menu. This feature is an audio link meant to replace other cables between the TV and the audio system (A/V receiver or speaker system). When ARC is active, TV does not mute its other audio outputs automatically. So you need to decrease TV volume to zero manually, if you want to hear audio from connected audio device only (same as other optical or co-axial digital audio outputs). If you want to change connected device’s volume level, you should select that device from the source list. In that case volume control keys are directed to connected audio device. System Audio Control
Allows an Audio Amplifier/Receiver to be used with the TV. To activate this feature set the Speakers option in the Setup>More menu as Amplifier. The TV speakers will be muted and the sound of the watched source will be provided from the connected sound system. Note: The audio device should support System Audio Control feature and CEC option should be set as Enabled. English - 12 -
TV Menu Contents
Picture Menu Contents
Mode Contrast Brightness Sharpness Colour Energy Saving Backlight Advanced Settings Dynamic Contrast Noise Reduction Colour Temp
White Point
You can change the dynamic contrast ratio to desired value. [. . . ] Notes: You cannot switch to any other channel while there is an active timer on the current channel. It is not possible to set timer for two or more individual events at the same time interval. Troubleshooting & Tips
Tv will not turn on
Make sure the power cord is plugged in securely to wall outlet. Poor picture
• Check if you have selected the correct TV system. [. . . ]