[. . . ] Before operating the unit, please read these operating instructions thoroughly and keep them for future reference. Español
Français
English
For Z, XZ, MZ indoor unit
Provide maximum comfort, clean air and optimise energy saving
ECONAVI + INVERTER The Perfect Energy Saving Technology
ECONAVI detects where energy is normally wasted and adjusts cooling/heating power depending on room conditions and activity levels. Nanoe For a freshness and cleaner environment
nanoe generates negative ions using the air in the room to give a healthy air. It also provides moisturizing effect on the skin or hair and reduces the smell in the room and constrains propagations of mold and bacteria. [. . . ] 1
ON TIMER OFF
CANCEL
2
3
SET
Multi
• Function not applicable. AIR SWING
To adjust airflow direction
1 Select ON or OFF timer Example: OFF at 22:00 • Each time pressed:
Cancel
(Remote control display)
2 Set the time 3 Confirm • Keeps the room ventilated. • In COOL/DRY mode , if AUTO is set , the louver swings left/right and up/down automatically. In HEAT mode, if AUTO is set, the horizontal louver is fixed at the predetermined position. sET
TIMER
• To cancel ON or OFF timer , press or to select respective or then press . Temperature
10
Sunlight Sensor operation
ECONAVI ; Detecting sunlight intensity, the unit adjust temperature to save energy. ECONAVI is activated, the unit maintains set Ambient condition temperature until a high Mode sunlight intensity is detected. The sunlight sensor detects +1 °C COOL/DRY sunlight intensity during Set weather or day/night temperature changes, and the unit adjusts HEAT -1 °C -1 °C temperature. In a room without window or with thick curtain, the sunlight sensor will judge as cloudy/night. The human activity sensor will also scan for area of heat source and movement in a room. Based on area activeness horizontal airflow direction louver will adjust either fix at predetermined position or swing left/right periodically. The human activity sensor performance is influenced by indoor unit location, movement speed, temperature range, etc. The human activity sensor may: - mistakenly detect an object with heat source & movement similar to human, such as pets, etc. - mistakenly detect as non-heat source & movement if a human stays motionless for certain period of time. Do not place large objects near the sensor and keep away heating units or humidifier from the sensor’s detection area. Detection area
English
How to use
(Remote control display)
POWERFUL QUIET
For TZ, MTZ indoor unit
Multi
Multi split system
To switch between powerful & quiet
(NORMAL)
POWERFUL: To reach temperature quickly • This operation stops automatically after 20 minutes. qUIET: To enjoy quiet operation • This operation reduces airflow noise. MODE
Press and hold for approximately 10 seconds to show temperature setting in °C or °F. Remote control receiver and indicator POWER (Green) TIMER (Orange) Remote control display
To select operation mode
AUTO mode - For your convenience • During operation mode selection, the power indicator will blinks at initial. Unit selects operation mode every 3 hours Multi according to setting temperature, outdoor temperature and room temperature. COOL mode - To enjoy cool air • To reduce power consumption during COOL mode, use curtains to screen off sunlight and outdoor heat. DRY mode - To dehumidify the environment • Unit operates at low fan speed to give a gentle cooling operation. [. . . ] Some types of wall paper may collect dusts easily (recommended to clean the area around the air conditioner frequently). During COOL/DRY mode, the indoor unit stops and • The system has locked to operate in HEAT model only. Discoloration is subject to material types used in plastic parts, Discoloration of some plastic parts. Accelerated when exposed to heat, sun light, UV light, or environmental factor. [. . . ]