[. . . ] Jabra MOTION
User Manual
jabra. com/motion
3. 1 HEIGHT ADJUSTMENT
6 7 7
3. 2 LEFT OR RIGHT EAR WEARING STYLE 3. 3 EARGEL POSITIONING
4. HOW TO CHARGE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4. 1 CHARGING USING THE MICRO-USB CABLE 4. 2 CHARGING USING THE WALL CHARGER 4. 3 BATTERY STATUS
8 8
9
5. HOW TO CONNECT. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5. 1 CONNECT WITH A BLUETOOTH DEVICE 5. 2 CONNECT WITH AN NFC DEVICE
10 11
5. 3 TRANSFER AUDIO BETWEEN NFC DEVICE AND HEADSET 12
6. HOW TO USE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Depending on the NFC device, this feature might not be available.
12
ENGLISH
5. 3 TRANSFER AUDIO BETWEEN NFC DEVICE AND HEADSET
6. HOW TO USE
Volume touch-sensitive panel
Call button
Busylight indicator
LED indicators
Voice and Mute microphone button
13
ENGLISH
On/off
Open or close the flip boom-arm
Answer call
Open the flip boom-arm, or tap the Call button if the boom-arm is open Close the boom-arm, or tap the Call button When not on a call, tap the Call button to hear the remaining talk time Double-tap the Call button when there is an incoming call Double-tap the Call button when not on a call
End call Talk time status Reject call Redial last number Adjust speaker volume
Slide a finger up/down the Volume touch-sensitive panel Tap the Voice and Mute microphone button when not on a
Voice commands
call, until you hear 'Say a command'. Say 'What can I say?' for a list of voice commands
Mute/ un-mute microphone
Tap the Voice and Mute microphone button during a call to mute the microphone. Tap again to un-mute.
14
ENGLISH
6. 1 BUSYLIGHT
The Busylight indicator has 2 features: Incoming call indication (fast flashing red light) On a call indication (slow flashing red light)
NOTE: It is possible to turn to turn the Busylight indicator on/off using the Jabra Connect app.
6. 2 MULTIPLE CALL HANDLING
The headset can accept and handle multiple calls simultaneously.
End current call and answer incoming call
Tap the Call button
Switch between held call and active call
Press and hold (2 secs) the Call button
Put current call on hold and answer incoming call
Press and hold (2 secs) the Call button
Reject incoming call
Double-tap the Call button
15
ENGLISH
6. 3 VOICE COMMANDS ON/OFF
Voice commands are on by default. To turn voice commands on/off: 1. Press and hold the Voice button while opening the flip boom-arm. 2. Release the the Voice button when the flip boom-arm is open.
NOTE: It is also possible to turn voice commands on/off using the Jabra Connect app.
6. 4 VOICE COMMANDS
DESCRIPTION
What can I say?Answer Ignore Hear a list of all voice commands Answer incoming call Reject incoming call
16
ENGLISH
DESCRIPTION
Redial Call back Battery Cancel Phone commands
Redial last number dialed Call the phone number that last called you Hear current battery status Cancel voice command Turns on the connected device’s phone commands (e. g. Pairing cancelled Pairing failed Mobile connected PC connected
17
ENGLISH
Pair new device
Enter pairing mode
DESCRIPTION
Two devices connected Not connected Redialing
Mute on / Mute off
Call from (name or number from phone address book) Unknown caller Low battery Your remaining talk time is. . . Say a command Voice on Voice off
18
ENGLISH
7. 1 CALL ASSIST
If the flip boom-arm is open, simply pick up the headset from the desk to your ear to automatically answer an incoming call.
19
ENGLISH
7. MOTION SENSOR CONTROLS
7. 2 POWER NAP
To extend battery life always close the flip boomarm when the headset is not in use. If the flip boom-arm is left open the headset will enter Power Nap mode when it has not been moved for 60 minutes (when Bluetooth connected), or 5 minutes (when Bluetooth not connected). The headset will announce ‘Power Off’ when it enters Power Nap mode. The headset will announce ‘Power On’ when exiting Power Nap mode.
NOTE: If the headset is in Power Nap mode for 24 hours, the headset will automatically turn off 100% to preserve battery. To turn the headset back on, close the flip boom-arm and then open it.
20
ENGLISH
7. 3 INTELLIGENT VOLUME CONTROL
The headset uses Intelligent Volume Control to adjust the headset speaker volume depending on the motion of the wearer, and the sounds of the surrounding environment (e. g. [. . . ] 3. Open Jabra Direct and set the desired mode by adjusting the ‘Wireless range’ to setting ‘Low’ or ‘Very low’.
9. 3 HOW TO CARE FOR YOUR HEADSET
Always store the headset with the power off and safely protected Avoid storage at extreme temperatures (above 35°C/95°F or below -20°C/-4°F). This can shorten battery life and may affect headset operation Do not expose the headset to rain or other liquids
24
ENGLISH
JABRA MOTION HEADSET
Weight: Dimensions: Microphones: Speaker: Operating range: Bluetooth version: Paired devices:
DESCRIPTION
17. 5g L 53. 5mm x W 16mm x H 24mm 2 Omni-directional microphones with Jabra Noise Blackout technology Micro dynamic, 14. 8mm Up to 100m (300 feet), Class 1 4. 0 Up to 8 stored devices, 2 connected devices at same time (MultiuseTM) A2DP (v1. 6), Hands free profile (v1. 6), Headset profile (v1. 2) Up to 7 hours Up to 5. 5 hours (with Busylight on) Up to 15 days -10°C to 60°C (14°F to 140°F) -20°C to 35°C (-4°F to 95°F) 100-240V, 50-60Hz 0000
Supported Bluetooth profiles: Talk time: Standby time: Operating temperature: Storage temperature: AC power supply Pairing passkey or PIN:
25
ENGLISH
10. TECHNICAL SPECIFICATIONS [. . . ]