[. . . ] You must register this handset with your base unit before it can be used. This installation manual describes only the steps needed to register and begin using the handset. Please read the base unitâs operating instructions for further details. Please read this installation manual before using the unit and save it for future reference. [. . . ] At its loudest setting (volume and volume booster features set to their highest settings), the product can output sound at up to 40 dB (KX-TGMA44) or 50 dB (KX-TGMA45). To prevent hearing damage, we recommend that you set this product to the lowest volume setting at which you can hear adequately. 2 Press MjN or MkN on the side repeatedly to select the desired
volume. R The selected volume setting is shown on the handset display while talking. R The selected volume setting is used for future calls when the booster is turned on. Pdf
15
2016/04/26
10:11:32
Accessibility
Note: R Noise reduction is automatically turned on when the booster is turned on. In this case, the menu that allows you to turn off noise reduction is not shown even after you press MMENUN while on a call. R is not shown if the noise reduction feature was turned off before you turned on the volume booster. R If the auto boost feature is turned on (page 16), volume booster turns on automatically when you make or answer a call. If the auto boost feature is turned off, volume booster turns off automatically at the end of each call. Turning on auto boost
If the auto boost feature is turned on, volume booster turns on automatically when you make or answer a call. This feature is useful if the unit is used mainly by a user who is hard of hearing. A MSAVEN a MOFFN
R If the volume booster is turned on, the BOOST indicator lights in red during a call. Note: R While on a call, you can temporarily turn the volume booster off by pressing MBOOSTN, and adjust the volume by pressing MjN or MkN on the side repeatedly. Adjusting the volume
While on a call, you can adjust the volume by pressing MjN or MkN on the side repeatedly. R The selected volume setting is applied immediately and is also used for future calls. A separate setting is used for when volume booster is on and when it is off. Pdf
16
2016/04/26
10:11:32
Accessibility
Available volume settings The available settings vary by model and whether volume booster is turned on or off. Â Hearing aids that are equipped with a telecoil (T-coil) â Audio neckloops with a 3-pole, 2. To use with a T-coil-equipped hearing aid
1 Set your hearing aid to the "T" setting. R Refer to your hearing aidâs operating instructions for details. To use a neckloop When using a neckloop with the handset, you can speak using the neckloopâs microphone or using the handsetâs microphone. [. . . ] Compliance with TIA-1083 standard
Compatible with Hearing Aid T-Coil
Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants. Pdf
23
2016/04/26
10:11:33
Appendix
Notice:
LThis product is designed for use in the United States of America. Sale or use of this product in other countries may violate local laws. Com/support
Get everything you need to get the most out of your Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, BaÆ©eries, Backup Chargers & moreâ¦
Customer Services Directory
For Product InformaÆon, OperaÆng Assistance, Parts, Ownerâs Manuals, Dealer and Service info go to hÆ©p://shop. [. . . ]