[. . . ] User Manual
Di5510/Di7210
Recycled paper is used for the inside pages of this book.
Di5510/Di7210
User Manual
ENERGY STAR® Program
The ENERGY STAR Program has been established to encourage the widespread and voluntary use of energy-efficient technologies that reduce energy consumption and prevent pollution. As an ENERGY STAR Partner, we have determined that this product meets the ENERGY STAR guidelines for energy efficiency, based on the following features.
Auto Low Power
This function conserves energy by lowering the set temperature of the fixing unit. In the standard setting, Auto Low Power operates automatically when 15 minutes have elapsed after completion of the last copy, with the copier remaining in the ready to copy state during that time. The time period for the Auto Low Power function can be set for 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes, 120 minutes, or 240 minutes. [. . . ] At every touch the key shifts the selection in the display that includes paper type, if specified in Key Operator mode. When all settings are completed, touch OK to return to the Application Selection Screen. 6-37.
Option: Press [Mode Check] to view the selection, and make a Proof copy, if desired. After copying is completed, touch Sheet/Cover Insertion on the Application Selection Screen or press [Panel Reset] to release the mode and reset the machine.
9-7
Applications
Chapter
Chapter is used with the EDH in 1-2 mode for the purpose of locating title pages on the right side, rather than reverse side, of a duplex copy. To effectively locate the title page on the right, a blank sheet will be automatically created on the reverse side of a sheet, if required.
Title pages: Max. Store mode is also available; in this case use platen glass or EDH Use STAMP together with this function to print chapter number onto chapter page in addition to page number, numbering, or watermark numbering. Incompatible Basic Copying Conditions: 1-1, 2-2, 2-1, Group, Punch using PK-2 Punch kit (when selecting Copy insertion mode), Rotation Sort, Rotation Group, Face Up Incompatible Special Originals: Mixed Original, Tab Paper Incompatible Applications: Combination, Transparency Interleave, Image Insert, Program Job, Non-Image Area Erase, Repeat, Storing image in Overlay Memory
1-sided originals Copies in Chapter mode Tilte page
7 3 5
78 5 34 12
4
8 6 2
6
1
Title pages
Application Selection Screen
Title page
Chapter Insertion Setting No. 3 Use the keypad on the control panel to enter the page number of each title page. 5 Repeat this for each title page number you want to appear on the right hand side. When setting more than 15 locations, touch the arrow key to move to the next page. Be sure to touch SET after each page number entry, up to a total of 30 entries.
Option: Touch Booklet on the Chapter Insertion Setting No. To change the selection of paper tray for copying title pages, touch Copy Insertion on the screen. In this case, you can touch CHANGE OF THE INSERTION TRAY to change the currently selected paper tray displayed on the screen.
6 When all entries are made, touch OK to return to the Application Selection Screen. 6-37.
Option: Press [Mode Check] to view the selection, and make a Proof copy, if desired. After copying is completed, touch Chapter on the Application Selection Screen or press [Panel Reset] to release the mode and reset the machine.
NOTES: 1 Entering "0" or the same page number twice will be ignored on the screen. 2 Chapter insertions occur in sequence even if original page numbers are entered out of sequence. 3 When a page number entered is larger than the total original page count, it will be ignored. 9-9
Applications
Combination
Use this function to lay out and copy a fixed number (2, 4, or 8) of pages onto one sheet of copy paper (2 in 1, 4 in 1, or 8 in 1). Original/Copy size: 11"x17", 8. 5"x14", 8. 5"x11"R, 8. 5"x11", 5. 5"x8. 5" Incompatible Basic Copying Conditions: APS, Group, Rotation Sort, Rotation Group Incompatible Special Originals: Mixed Original Incompatible Applications: Sheet/Cover Insertion, Chapter, Booklet, Transparency Interleave, Image Insert, Book Copy, Program Job, Non-Image Area Erase, Repeat, Storing image in Overlay Memory
Layout Original Portrait type 1 1 2 3 4 2 1234 5678 2 4 1 3 1357 2468 2 in 1 Horizontal order 4 in 1 8 in 1 Vertical order 4 in 1 8 in 1
Landscape type 1 3 2 4
1 3 5 7
2 4 6 8 1 2 3 4
1 2 3 4
5 6 7 8
Application Selection Screen
Combination Mode Selection Screen
9-10
Applications
Combination (continued)
1 Touch APPLI. 3 Touch 2 in 1, 4 in 1, or 8 in 1 in the desired order area, referring to the illustration on the previous page. When selecting any tray other than the one that is set and displayed on the Basic Screen, touch the desired tray key. 6-37.
Option: Press [Mode Check] to view the selection, and make a Proof copy, if desired. [. . . ] for 8. 5"x11" Copy Rate Di5510: 55 cpm: 8. 5"x11", 5. 5"x8. 5" 45 cpm: 8. 5"x11"R 37 cpm: 8. 5"x14" 32 cpm: 11"x17" Di7210: 72 cpm: 8. 5"x11", 5. 5"x8. 5" 56 cpm: 8. 5"x11"R 47 cpm: 8. 5"x14" 40 cpm: 11"x17" Continuous Copy 1~9, 999 copies Voltage 120V±10% 16A 60Hz±2. 5Hz Grounding Isolation recommended Power Consumption Max. 75 dB (A) or less, during copying Automatic Modes AMS; AES (plus 9-level manual density); APS detects 11"x17", 8. 5"x14", 8. 5"x11"R, 8. 5"x11", 5. 5"x8. 5" Magnification Presets; 0. 500, 0. 647, 0. 733, 0. 785, 1. 214, 1. 294, 1. 545, 2. 000 3 User Sets - 0. 250~4. 000, set by Key Operator Zoom range - 0. 250~4. 000 in 0. 001 (0. 1%) steps Specifications Subject To Change Without Notice
16-2
Specifications
Originals on Platen Max. size: 11"x17" (297 mm x 458 mm) Originals in EDH Sunplex original mode: 1>1; 1>2 11"x17"; 8. 5"x14"; 8. 5"x11"R; 8. 5"x11"; 5. 5"x8. 5" Max. 100 sheets (20 lb) feed/exit capacity Duplex original mode: 2>2; 2>1 11"x17"; 8. 5"x14"; 8. 5"x11"R; 8. 5"x11"; 5. 5"x8. 5" Max. [. . . ]