[. . . ] Warnings and safety instructions
• In case of failure, the power cable is the disconnect device for this equipment. To remove all electrical power from the equipment, disconnect the power cable from the electrical outlet. Connect the Set-top box to the electrical outlet in accordance with the indications mentioned on the identification label affixed on the Set-top box (voltage, power, frequency of electricity network). [. . . ] Even if the Set-top box and the television set are disconnected from the power supply, lightning can still damage them. Never connect the Set-top box to a mains power socket which is loose, shows signs of wear or damage, you risk getting an electric shock. When connecting or disconnecting the power cord, always take hold of the plug without pulling on the cord. Never pull the power cord when disconnecting from the mains power socket. Never place objects on the power cord, and never pull on it or fold it. Ensure that the Set-top box never lies on the power cord or any other cables. Ensure the Set-top box is placed on a flat and stable surface, placing it incorrectly may lead to the power cord being disconnected. In order to guarantee the correct operation of your Set-top box, you must: place it indoors to protect it from lightning, rain, and direct sunlight, place it in a dry and well ventilated area, keep it away from heat sources such as radiators, candles, lamps, etc. Protect it from dampness, place it on a flat surface from where it will not fall and is out of the reach of children, avoid violent shocks. Choose a stable, horizontal surface on which the Set-top box will not be exposed to intense vibrations. Do not place anything on top of your Set-top box (as it would restrict ventilation): the ventilation slots located on the casing prevent your Set-top box from overheating. If you place the Set-top box in a compartment or other closed space, leave a space of at least 10 cm on each side and 20 cm on the front and back of the Set-top box, connect it directly to the mains with the provided cords, the socket must be near the Set-top box and easy to access. 4
Always keep the power cord unit out of the reach of children or domestic animals. Only personnel approved by the manufacturer can repair the Set-top box. [. . . ] When connecting a USB peripheral device, respect the way of insertion and never use force. Cleaning the Set-top box
The outer casing of the Set-top box can be cleaned with a soft and dry cloth. Do not use any type of abrasive pad, scouring powder or solvents, such as alcohol or turpentine, as they could damage the surface of the Set-top box. [. . . ]