[. . . ] Before reading these instructions, please read the Safety Guide and the Quick Reference Guide enclosed with this unit. Please carefully read these instructions and the enclosed Safety Guide and Quick Reference Guide. introduction
Introduction
Thank you for purchasing a Panasonic Document Scanner. About the documentation
The scanner documentation consists of 3 manuals: the Operating Manual (this manual), the Safety Guide and the Quick Reference Guide. [. . . ] ¢ If an application other than "Scan Button Setting Tool" is selected, change the application to "Scan Button Setting Tool". 28
Operating Manual
Installation
Deleting Installed Software
If you want to remove the software that is installed on your computer, follow the procedure below to uninstall them. ¢ The software is displayed with the program names below:
Software Device driver TWAIN ISIS Image Capture Plus Presto!XX" and the number that follows a program name are the software version. When you upgrade the software, the numbers above may be different from the actual software version. Operating Manual
29
Operation
O p
e
r
Preparing Documents
Acceptable Documents
The acceptable documents for this scanner are as follows. )
Paper thickness for Feeding: KV-S1026C: 20â209 g/m² KV-S1015C: 40â209 g/m² ⢠The height of all the documents on the tray should be less than 5 mm. ¢ With the exception of ISO format cards, the minimum guaranteed feeding length is 70 mm (2. ¢ Single paper feeding is recommended for papers exceeding the legal size length. ¢ â¢
The height of the total cards (the total thickness including the embossing on each card) should be less than 5 mm (0. Additionally, the embossing on each card must not get entangled with others. If the scanning fails, place the card upside down, and then try again. Use the mixed batch card guide (page 37) when scanning mixed media (cards and papers) at the same time. 30
Operating Manual
Operation
Unacceptable Documents
The following types of documents may not scan properly: ⢠Curled, wrinkled or folded documents
Documents must also meet the following conditions. )
Feeding direction
⢠⢠⢠⢠⢠⢠⢠⢠⢠â¢
*1
Carbon paper Thick or irregular documents such as envelopes Perforated or punched paper Non-rectangular or irregularly shaped paper, such as document with tags Coated paper Torn or frayed documents Extremely smooth, shiny paper, or paper that is highly textured Carbonless copy paper Transparent or partially transparent documents such as OHP sheet and tracing paper Photographs*1
Photographs may become scratched or damaged, etc. Do not scan the following types of paper: ⢠Damaged or notched document/card ⢠Documents out of specified size, thickness, and weight ⢠Documents containing hard attachments such as metal or plastic (ex. clips or staples) ⢠Bound or glued documents ⢠Cloths , metallic sheets , OHP sheets , plastic films , etc. ¢ Document with wet ink or cinnabar seal ink ⢠Thermal or photosensitive paper
Operating Manual
31
Operation
Notes about documents for scanning
â¢
Documents may not be able to be scanned due to poor paper quality, even if the thickness is within the specified limits. If a paper jam or double feeding occurs, try scanning again after doing the following: â Clean the rollers and sensors. Â Reduce the number of sheets of paper loaded on the feed tray. Notes about double feed detection
â¢
This scanner is equipped with an ultrasonic sensor to detect double feeding. 32
Operating Manual
Operation
Scanning Documents
Notice
â¢
Make sure to remove paper clips and staples from documents before scanning. [. . . ] Pack the scanner with the AC adaptor, power cord, USB cable, DVD-ROM, Safety Guide and Quick
Reference Guide. KV-S1026C KV-S1015C
Binary Scanning speed*1 (portrait, 200 dpi) Color
Resolution Scanning Scanning mode
100â600 dpi (1 dpi step) Optical: 300 dpi / 600 dpi (Automatic switch) Binary, 256 levels grayscale, 24-bit color, MultiStream: Binary & Grayscale, Binary & Color Single touch scan (3 buttons) Place to scan Ultrasonic double-feed detection Double Feed Skip Skip button â
Scanning function
Compression Width Length Paper Thickness Paper thickness for Feeding Format Card
*3
JPEG (color, grayscale) 48â216 mm When feeding one sheet: 70â2, 540 mm When feeding multiple sheets: 70â356 mm 0. )
Size Thickness
Operating Manual
61
Appendix
Item Feed tray capacity Exit tray capacity Scanning Life*4 Roller replacement*4 Maintenance External dimensions (Width´Depth´Height) Weight Power requirement Scanner Power consumption Scanning Ready Sleep Power OFF Operating Environment Storage Environment
*1
KV-S1026C 50 sheets (80 g/m² New Paper) 50 sheets (80 g/m² New Paper) 300, 000 sheets 100, 000 sheets
KV-S1015C
Clean the rollers, sensors, and scanning glass once a week or every 2, 000 sheets scanned. 303 ´ 177 ´ 137 mm (When the exit tray and feed tray is closed) 2. [. . . ]