[. . . ] Indb 1
7/18/2017 4:50:19 PM
Before Use
This Quick Guide explains how to use the Quick Menu. Please read the Operating Instructions thoroughly before using the Quick Menu. [. . . ] If you select “Delete”, the timer setting of the selected pattern will be deleted. Note:
• If the time overlaps with another pattern, "Set time is overlapped!Indb 4 7/18/2017 4:50:21 PM
How to use the Quick Menu
English is
Select to force the Heater on. Note:
• Force Heater is disabled whenever operation is already on and ‘Disabled due to operation ON!Indb 5 7/18/2017 4:50:22 PM
How to use the Quick Menu
Select this icon to delete (cancel) or change the pre-set Weekly Timer. If you select “No”, the screen will return to the Main Screen. [Example of a Timer setup] Select the day(s) which you wish to edit using
buttons. / • Select mode using
5 Set the temperature for both Zone 1 and 2 (if your system has the 2-Zone setting). Note:
• Timer is disabled when Force Heater is turned on or Heat-Cool SW is enabled. If you have preset the Weekly Timer on 2 zones, you must repeat the same procedure with Zone 2. Indb 6 7/18/2017 4:50:22 PM
How to use the Quick Menu
English
Select to defrost the frozen pipes. )
Force Defrost
Select to restore the previous settings when error has occurred. [. . . ] 5 Still inn temperaturen for både Sone 1 og 2 (hvis systemet har innstilling for 2 soner). Hvis du har forhåndsinnstilt Uketimer for 2 soner, må du gjenta den samme prosedyren for Sone 2. [. . . ]