[. . . ] This guide describes the operation of the dual band GSM telephones M320. © Mitsubishi Electric Telecom Europe, 2002 Whilst every effort has been made to ensure the accuracy of the instructions contained in this guide, Mitsubishi Electric reserves the right to make improvements and changes to the product described in this guide and/or to the guide itself, without prior notice.
english
Table of contents
1. Broadcast - cell broadcast (CB) messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Personalising your connection settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Select Replace to end Call1 and answer Call2 or select Reject to refuse Call2 and go on with Call 1. To put a call on hold and switch from Call 1 to Call 2: 1 Whilst on a call a beep sounds to indicate a second incoming call. Select Replace to take Call 2 and end Call 1, Select Reject to refuse Call 2 or press the
key to put Call 1 on hold and take Call 2.
Swap to get back to Call 1 and put Call 2 on hold or select Join to have a 3 party conversation.
Caller Line Identity - showing/ hiding your mobile number (network dependent)
Most networks allow Caller Line Identity feature (CLI). This feature allows the phone number or the identity of the caller to be displayed when a call comes in. Selecting Receiving caller ID allows to check the availability of this feature. You can check the availability of this feature on your network or subscription. The network then either returns Presentation available or Presentation unavailable information.
Hiding or showing your number
1 2 3 4 5
Press . Select Hide my ID or Show my ID .
Receiving caller ID
Finding out your current ID status
1 2 3 4
Press . Your current ID status is displayed.
Mode of operation
This network dependent setting allows mobile operations to be either Standard or Modem type. · Standard mode The mobile tries to reach a GSM or a GPRS networks. If the mobile succeeds attaching a GPRS network, is displayed on standby mode. The mobile can then send and receive voice calls and packet data calls. 4 Select Standard · Modem mode The mobile tries to reach a GPRS networks only (not the GSM networks).
37
Sending my ID
You can disable the sending of your own number on a call by call basis by adding #31# before the number you are dialling. You can also ask your service operator to always hide the sending of your mobile phone number. Once hidden by your operator you can show your number, on a call by call basis, by typing *31# before the number you are calling. 1 Press
Standard network setting
Settings
2 Select Options then select
2 3 4 5
Select GSM Services . The phone resets and gets back to its original network setting.
It can only receive packets data calls; voice calls are then barred. However if the GPRS services are lost, the mobile automatically returns to the Standard operation mode. 4 Select Modem
Option Modify by list Modify by code Delete
Description
To display the list of all networks stored in the phone (alphabetical order). To edit or enter the identification operator number if you have the information. To delete an entry
6 Press OK
to confirm the
selection.
Network automatic search:
When the phone is on, it automatically searches the last network it was registered to (usually the home network). If it is not available, the phone automatically searches and selects one of the networks registered in the preferred network list (located in the SIM card). [. . . ] 25 Boulevard des Bouvets F92741 Nanterre - Cedex France
69
Index
Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Automatic search . . . . . . . . . . . . . . . . . . . .
34 34 35 35 39
Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Banners Barring password Battery
Downloading . . . . . . . . . . . . . . . . . . . . . Connection manager . . . . . . . . . . . . . .
I
Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]