[. . . ] LEVEL TO THIS LINE
TRACE AROUND THIS TEMPLATE
Wall cutout for SW-95/SW-62/BE-65 in-wall speaker
IMPORTANT! [. . . ] Mark wall with template, using a stud finder to maintain a 2" distance from any stud. Make sure that you are clear of any crossbraces in the wall structure.
FOR STANDARD INSTALLATION DRYWALL THICKNESS CANNOT EXCEED 1. 25 INCHES. FOR THICKER WALLS CALL M&K SOUND.
Be careful when bending and handling the strip so that you do not rip it. Tape speaker wire to the back wall so the end is within the opening as shown. Fold the first section of the foam strip and insert the corner through the wall opening. Continue folding and inserting the rest of the foam strip into the wall opening until the foam frame is created. [. . . ] Make sure that the frame is centered within the opening
Note: Do not put any other acoustic filler within the wall opening as it can interfere with speaker mounting.
PN: 70306 SW95/SW62/BE65 cutout temp 08/26/02 pt
7-1/4" (18. 4cm) [. . . ]