[. . . ] Attaching an Instrument The removable mounting shoe allows quick attachment and removal of your instrument. The shoe has a 1/4"-20 threaded shaft, a spring pin, and a ribbed mat, and is retained by a quick-release lock lever. When mounting an optical instrument, you must first remove the shoe from the head. [. . . ] Figure 2 Quick release lock lever Pan head handle Horizontal pan lock Tri-brace Tri-brace lock knob Leg lock clamp Congratulations on your purchase of a quality Orion product!Your new Tritech field tripod can support small binoculars, telescopes, still cameras, and video cameras. Designed for use either indoors or outdoors, the Tritechs feature a smooth, two-way pan head with a quick-release shoe for convenient operation. To get the most from your new tripod, please take a few minutes to read these instructions and operating tips. Refer to the labeled figure for the names of specific parts of the tripod. To lengthen a leg, release one of the leg lock clamps, then extend a section. Extend one section at a time until all legs are at the desired length. Before mounting an instrument on the tripod it is a good idea to press down on the pan head to make sure the legs are locked securely and will not give way under the instrument's weight. The widest stance is achieved when the tri-brace is as far down Raising and Lowering the Elevator Shaft To raise or lower the pan head, first loosen the elevator lock knob. Then use the hinged hand crank to move the aluminum rack-and-pinion elevator shaft up or down. Retighten the elevator lock knob to secure the instrument at the new height. To adjust the tension needed to raise and lower the elevator shaft, rotate the elevator shaft housing. Rotating the housing counter-clockwise loosens the tension, while rotating clock- IN 143 Rev. You will need to adjust the tension when using the elevator crank to raise or lower instruments of different weights. General Care and Cleaning When using the tripod in direct sunlight, be aware that its aluminum surfaces can become hot. If the tripod is used in wet conditions, dry it completely with a soft cloth after use. Clean the tripod with mild detergent and a soft cloth. Suggested Accessories Orion Tripod Accessory Bin Put extra eyepieces, camera lenses, eyeglasses, lens caps, or other accessories in this roomy, three-compartment bin. Made of rugged nylon, it fastens quickly to the tripod by way of Velcro loops. [. . . ] If the product is not registered, proof of purchase (such as a copy of the original invoice) is required. This warranty does not apply if, in Orion's judgment, the instrument has been abused, mishandled, or modified, nor does it apply to normal wear and tear. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. [. . . ]