[. . . ] FCC STATEMENT (For customers in USA) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] The EV compensation value can be set in the range from -2. 0EV to +2. 0EV. Press the four-way controller ( / ) and use to set the range of EV compensation value from -2. 0EV to +2. 0EV. Press the button to confirm the setting. EN-38 Setting White Balance This feature lets you make adjustments to compensate for different lighting types according to your shooting conditions. Use the four-way controller ( ) to select [White Balance], then press the button. Use the four-way controller ( ) to select the desired white balance setting, then press the button to confirm. 4. AWB EN-39 USING THE MODE DIAL Simple Mode [ ] (Simple) mode is the simplest way which allows you to take still pictures without having to set special functions or manual adjustments. Rotate the mode dial to and turn your camera on by pressing the power switch. When you press the shutter release button down halfway, the camera's Auto Focus feature automatically focuses the image. Press the shutter release button the rest of the way down to capture the image. Program Mode [ ] In the (Program) mode, the camera automatically sets the shutter speed and aperture for taking still images. You can adjust other functions, such as flash mode or continuous shooting mode. Rotate the mode dial to and turn your camera on by pressing the power switch. Press the shutter release button to capture the image. EN-40 Portrait Mode [ ] Select this mode to make people stand out with the background out-of-focus. Rotate the mode dial to and turn your camera on by pressing the power switch. Press the shutter release button to capture the image. Landscape Mode [ ] This mode allows you to take photographs of distant scenery or landscapes. Rotate the mode dial to and turn your camera on by pressing the power switch. Press the shutter release button to capture the image. EN-41 Sport Mode [ ] This mode allows you to shoot fast moving objects. Rotate the mode dial to and turn your camera on by pressing the power switch. Press the shutter release button to capture the image. Night Scene Mode [ ] This mode allows you to take photographs of people against a dusk or night-time background. Rotate the mode dial to and turn your camera on by pressing the power switch. Press the shutter release button to capture the image. EN-42 PLAYBACK MODE - THE BASICS Viewing Images You can display the still images one by one. Rotate the mode dial to , , , , , or and turn your camera on by pressing the power switch. To view the next image, press the four-way controller ( ). For protected images/movie clips, mark will be displayed. [. . . ] In this case, it will take a considerable length of time before the equipment can be returned to you owing to the complicated customs procedures required. If the equipment is covered by warranty, repairs will be made and parts replaced free of charge, and the equipment will be returned to you upon completion of servicing. If the equipment is not covered by warranty, regular charges of the manufacturer or of its representatives will apply. Shipping charges are to be borne by the owner. EN-88 If your PENTAX was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer's representatives in that country. [. . . ]