[. . . ] Installation Instructions Model CCDF Color Camera External Mount CCDF FEATURES:
l l l l l l l
High Resolution, 1/3"CCD Color Camera Compact Zinc Alloy Die Cast Body Waterproof Housing Waterproof Microphone Adjustable Mounting Angle Wide Angle Lens Flush Mount or Surface Mount
128-6951 1 of 12
Color Camera View:
Cable Connector End View:
1
128-6951 2 of 12
Specifications: 1. [. . . ] Connect the camera cable to the extension cable and route towards the monitor.
6
128-6951 7 of 12
Angle Flush Mount
Size of Mounting Holes (See the Attached Page)
Note: 1. Slant Washer 2 7
128-6951 8 of 12
Angle Flush Mount Installation: 1. Check behind panel for wire routing access and confirm that the drill will not damage any existing components. Drill four 1/8" positioning holes and one 7/8" mounting hole at the mounting location according to the drawing of Size of Mounting Holes. Screw the lock nut (# 3) and the flat washer 2 (# 7) with the non-threaded side to the camera neck in the showed direction. Place the camera neck through the pervious drilled hole with the lens exposed. Hold the top cover (# 5) by hand and tighten the lock nut (#3) towards the topcover (# 5) with the camera cable downwards. Connect the camera cable to the extension cable and route towards the monitor.
8
128-6951 9 of 12
Surface Mount
Note:
1. [. . . ] Connect the camera cable to the extension cable and route towards the monitor.
10
128-6951 11 of 12
© 2004 Audiovox Electronics Corp. , 150 Marcus Blvd. , Hauppauge, N. Y. [. . . ]