[. . . ] 0 August 1998
0
0
PowerStor L500 Library Unpacking Instructions
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Purpose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Library Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Selecting an Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Floor Space. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Overhead Clearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Surface Strength and Inclination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Power and Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Receiving the Library. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Unpacking the Library. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Uncrating the Rack-Mount Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Installing the Rack-Mount Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Uncrating the Library. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1
PowerStor L500 Library Unpacking Instructions Document 6321102-01, Ver. 0 August 1998
2
PowerStor L500 Library Unpacking Instructions Document 6321102-01, Ver. 0 August 1998
0
0
0
Introduction
Purpose
0
0
This document explains how to unpack the PowerStor L500 library properly. [. . . ] The installation location should meet the following environmental specifications. Temperature: 50°F to 104°F (10°C to 40°C) Relative humidity: 20% to 80% noncondensing Humidity gradient: 10%/hour Dry bulb temperature: 50°F to 104°F (10°C to 40°C) Wet bulb temperature: 77°F (25°C) Temperature gradient: 19. 8°F/hour (11°C/hour) across the range Temperature shock: 18°F (10°C) over two minutes Altitude: -500 to 30, 000 feet (-152. 4 to 9144 meters)
Power and Grounding Environmental Specifications
3
3
Selecting an Installation Location
5
Document 6321102-01, Ver. 0 August 1998
Receiving the Library
When receiving the library from the shipper, receive the unit as close to the installation location as possible. Inspect the shipping pallet and carton for damage that may have occurred during shipment. Report any damage to the shipper immediately.
3
6
Receiving the Library
Document 6321102-01, Ver. 0 August 1998
Unpacking the Library
The unpacking instructions vary depending upon whether you received a stand-alone or rack-mount library. If you received a standalone library, you should have only one shipping carton. Follow the instructions in "Uncrating the Library" on page 8 to unpack the library. If you received the rack-mount library, you should have two shipping cartons. The large carton contains the library, and the smaller carton contains the rack-mount kit. To unpack and install the rack-mount library, you must: Uncrate the rack-mount kit and verify its contents (see "Uncrating the Rack-Mount Kit") Install the rack-mount kit in the rack (see "Installing the Rack-Mount Kit") Uncrate the library and place it in the rack (see "Uncrating the Library" on page 8)
3
Uncrating the Rack-Mount Kit
3
Cut the packing tape at the top of the shipping carton and unpack the rack-mount kit. Before installing the rack-mount kit in the rack, compare the contents of the carton with the packing list inside the shipping carton. Install the rack-mount kit in the rack, referring to drawing provided in the shipping carton.
Installing the Rack-Mount Kit
3
Unpacking the Library
7
Document 6321102-01, Ver. 0 August 1998
Uncrating the Library
3
To uncrate a PowerStor L500 library:
Step
1
Action Cut the straps that secure the shipping carton to the pallet (see figure 4). [. . . ] If it is a rack-mount library, place it in the rack.
6
7 8
Figure 6 Removing the Library from the Shipping Carton
Packing foam
Library
Shipping bag
TK00005a
10
Unpacking the Library
Document 6321102-01, Ver. Refer to the PowerStor L500 Library User's Guide for information about connecting the library cables and operating the library.
Caution:
Do not attempt to open the front doors of the library when the library is powered off. These doors can be opened only when the unit is powered on.
Unpacking the Library
11
Document 6321102-01, Ver. [. . . ]